Full Product Manual
- 11 -
INSTALLATION PROCEDURE / STEP 16
Install the bottom guide. Use positioner to determine the bottom guide's position as illustrated (1). 
Drill holes with 8mm drill bit as illustrated (2). Fasten the bottom guide according to the holes from 
above steps by wall plugs and ST4.8x38 flat head screws, as illustrated (3) & (4).
16
LEFT HAND ASSEMBLY
RIGHT HAND ASSEMBLY
Check the bottom guide. Put the black rubber to 10mm position. This bottom guide 
fit for 3 dierent thickness. Secure the thickness is for 10mm glass.
Fasten the bottom guide as illustrated.
Install the door panel. Install sliding door ensuring that rollers are fixed over the running rail. 
Ensure that sliding door is placed within the bottom guide.
17
LEFT HAND ASSEMBLY
RIGHT HAND ASSEMBLY
INSTALLATION PROCEDURE / STEP 17










