Instructions

USER GUIDE
24
9.2. Tweak menu
Tweak function enables to change temperature, print speed, extrusion ratio, lighting, object fan control and encoder
seings. The in-print tweaks overrule the seings in the g-code.
Temperature modification: Heads and bed temperature can be changed, with heads object fans. Set the speed of the
object fan. By default, it is unlocked. If locked g-code can’t overwrite seing information.
Flow modification: Print speed and extrusion volume can be modified in percentage ratio to the original. Use the
reset buon to change back the values of the g-code.
Light seings: Lighting within the appliance and the display backlighting can be changed .
9.3. Pause Next Layer menu
Pause next layer function will stop printing at the end of the current layer. Once the layer is finished, the CraBot will
switch to Pause menu. This is a toggle buon – when the icon is crossed out, it means that Pause Next Layer function
is active. If pushed before layer is finished it will continue printing uninterrupted.
9.4. Pause menu
In Pause the menu users can change filament, continue printing or terminate the printing project. Pushing the play
buon will continue the printing. For filament change use the Extrude/Reverse functions or the preprogrammed
Load/Unload options.
For terminating the printing select “STOP” . The CraBot will ask for a confirmation again before stopping. If you
pressed the stop buon accidentally, you can press the back buon to continue the printing process.