Instructions

USER GUIDE
22
The “Options” menu is located on the right side of the screen. In the pop-up window you can set the language,
graphics, keyboard commands, colors and Crabot type. All build areas of all the crabots are-pre-set and
programmed in.
• Click on the “Add” buon located in the top row of icons. Select the 3D design plan you must print. The selected
object will appear at the center of the virtual build plate.
• To generating the toolpath information (gcode) Click
on the Slice buon to the right side of the screen.
A new screen pops up with options to specify the
printing quality and material to be used.
• Saving the gcode by clicking the “slice” buon
boom right.
• You can save the generated gcode onto a USB
drive and place it into the top of the printer or send
information directly to CraBot if connected via USB
cable. For detailed user’s instruction of CraWare,
download the user manual from crabot.com.
• Aer slicing, save the G code to a flash drive or
transfer a USB cable to CraBot. The program
provides easy access to the most important
information at www.craunique.com.