Instructions

USER GUIDE
15
6. OTHER MENU SETTINGS
6.1. Adjusting the lighting
• Select the Seings menu on the LCD screen and on page 1. Select the Lighting seings icon.
• You will see a variance pop up on the screen: two different touchscreen sliders.
• Adjusting the lighting: Move the line from the le to the right to vary the brightness of either the interior LED
lighting of the CraBot or the LCD display backlighting.
6.2. Activating the fans
• Select the Seings menu on the LCD screen and on page 1. Select the Fan control icon.
• Switch between 3 fans (object, extruder, case ) by pressing arrows. The name of the fan to be controlled is displayed
at the top of the screen.
The fan Control: Activate and deactivate the fans before or during printing to match your preferences. Extruder and
case fan seings automatically reset to default aer 60 seconds.