Instructions
IDEX USER MANUAL
33
6.4. Printing objects through the WEB interface
In the File manager you can see the available gcode files. You can print gcode files either from the internal storage or
from the flash drive.
Press the Print icon next to the file you want to print.
Confirm your choices with the pop-up messages and the print job will start.
You can follow the print process on the dashboard. The print bar shows the progress in percentage.
While printing is in progress, the Dashboard will change as follows:
• The Temperature and Extrude menus are deactivated. Aer printing, these menus will be active again.
• The Pause and Stop buons are activated.
• The print bar shows progress in percentage
• Use the temperature chart to keep track of head and tray temperatures. Data is updated every second.
6.5. Web interface seings
Camera
You can see the current camera image on the screen so you can keep track of your print job.
You can take snapshots of the image or make a video of the printing process.
Temperature
You can adjust the temperature of the individual heads
and tray or pre-heat them according to the material.
Extrude
From the Extrude menu, you can remotely extrude the
filament from the head when the head is heated.
Control
When you enter the Control menu, you will see the Home
buons and the x, y and z movement buons already
described above.
You can even monitor the movement of your printer through the camera.
Other seings
Lights
Similarly to the printer’s built-in menu, you can set up the printer lights here:
• Backlight
• Intensity of the LED screen illumination,
• and adjusting the background colors of the logo in different statuses.