Instructions

IDEX USER MANUAL
15
5.2. Home menu
Switch on the Crabot printer with the ON / OFF buon located at the back of the appliance.
The LCD panel on the front will light up.
You can navigate the touch screen by touching icons.
On the main screen, you can preheat the head to a preset temperature by pressing the print head or build-plate icon.
The display shows the following information:
1. HMI version number
2. The IP address (if the printer is connected
to a network)
3. The flash drive icon if there is a flash drive
plugged in
4. LAN icon (when the printer is connected)
5. The Wi-Fi icon when the printer is connected
to a Wi-Fi network
6. Door open icon
7. Head heating icon
8. Bed heating icon
The main menu items are on the le side:
• Print
• Heating
• Extrude
• Axes
• Info
• Seings
You can switch the head and the bed heating on and off.
1. 2. 3.
6.
4.
7.
5.
8.