Instructions
SINGLE HEAD - USER MANUAL
9
4. FIRST STEPS
4.1. Switching on the Appliance
Switch on Crabot by the ON / OFF buon located on the back part of the appliance.
The LCD panel on the front will light up.
Navigation on the touch screen is possible by touching icons.
On the main screen, you can preheat the head to a preset temperature by pressing the print head or build-plate icon.
In the top bar we can see:
• HMI version number
• The IP address if the printer is connected
to a network
• The Wi-Fi icon when the printer is connected
to a Wi-Fi network
• The flash drive icon if there is a flash drive
in the machine
4.2. Printer wizard
The first time you use the printer, the printer wizard will appear. The wizard will walk you through the steps needed to
get the most out of your printer:
• Language
• Time zone
• Firmware update
• Network (LAN/Wi-Fi)
• Calibration
If you are unsure, you can always run the printer wizard from the seing menu.