Instructions

8.7. Applying a new Kapton sheet to your build plate

Build plate Kapton sheets get worn out in time or can be damaged by the nozzle due to incorrect levelling or

removing the printed models. Reapplying a new Kapton sheet is essential to maximize print qualities if the old one

has issues/ damages. To reapply a new Kapton sheet, take the build plate out of the machine and remove the old

sheet by striping it oﬀ of the ﬂexible metal plate. Clean the surface of the plate with acetone.

Remove the protective plastic backing sheet (keep this safe for use later) from the new Kapton sheet. in order to get

to the sticky side. Apply some window cleaning liquid onto the plate and the sticky side of the sheet to help you to

correctly the position the sheet on the build plate. Align the Kapton to the front side of the laser marked grid. Once

the positioning is correct, squeeze out the excess liquid from between the plate and the sheet with a thin but solid

object, like a used credit card. Place the protective sheet (which was removed in the beginning) on top the new

Kapton to prevent scratches and damages during this process.

Start from the center of the plate and move horizontally and vertically. Once all the liquid has been squeezed out and

the sheet is applied properly, put the plate somewhere to dry. Allow the sticky part to rest for a day before using.

9. GUARANTEE AND LIMITATION OF LIABILITY

For special conditions relating to product guarantee, see the „Guarantee Statement” on a separate sheet, which is

also delivered with the product as well.

With the exceptions included in the regulations concerning the guarantee and to the greatest extent permied

by the relating act, Craunique Ltd. is not responsible for any direct, indirect, speciﬁc, stochastic or consecutive

damage claims which are stem from the breaching of the terms of guarantee, respectively any other legal theory,

included, but not limited to:

• The loss of usability

• The loss of income, the loss of actual or expected proﬁt (including the proﬁt from contract), the loss of expected

saving, loss of business, loss of opportunity,

• The loss of a fair name and injury to a fair name,

• The loss, injury or perishing of data,

• Any indirectly or consecutively caused damage or loss, including the damage caused by the changing of

equipment/installation or property, respectively

• The cost of the restoration or reproduction of data stored or used on the Product.

The restriction above does not refer to Craunique Ltd.’s legal liability for intentional, serious negligence and/or

default. Certain jurisdictions don’t allow the exclusion or limitation of accidental or consecutive damage, therefore if

such jurisdiction regulates the guarantee, the restrictions above does not refer to You.

Concerning any problems or inquiries, you can contact us at: support@craunique.com

SINGLE HEAD  USER MANUAL