Instructions

SINGLE HEAD - USER MANUAL

8. CLEANING AND MAINTENANCE

IMPORTANT!

Cleaning and lubrication should only be conducted while the extruder and built plate are cold. Please allow the

Crabot 3D printer to cool down at least 30 minutes before cleaning or maintenance. It necessary to clean the

printer aer every 1000 hour. Aer every 1000 hour we need to change the used and worn parts in the printer. The

printer will warn the user.

8.1. Cleaning

Clean the metal housing of the Crabot by wiping with a damp cloth.

Cleaning the build plate with window cleaner or Acetone. Wipe clean with a dry cloth or paper towel.