Instructions

SINGLE HEAD - USER MANUAL
19
7.3. Uploading files through the WEB interface
In the File manager menu, you can drag and drop, or upload gcode files on the conventional way.
Please note, only gcode files are allowed. If you have .stl file, you need to slice it before. See chapter 6.2.
7.4. Printing objects through the WEB interface
In the File manager, you can see the available gcode files. You can print gcode files either from the internal storage or
from the flash drive.
Press the Print icon next to the file you want to print.
Confirm your decision with pop-ups, and then printing will begin.
On the Dashboard, you can follow the print process. The print bar shows the percentage of completion.
Some of the options will be unavailable during printing.