Operator’s Manual Lithium-ION 24 -Volt 13-in. Weedwacker Cordless Trimmer Model No. 172.743240 CHARGE BATTERY BEFORE FIRST USE CAUTION: Read, understand and follow all Safety Rules and Operating Instructions in this Manual before using this product. Sears Brands Management Corporation, Hoffman Estates, IL 60179 See the full line of Craftsman® products at craftsman.
SAFETY SYMBOLS TABLE OF CONTENTS Warranty……………………………..................................……………..Page Safety Symbols……………………..................................……………..Page Safety Instructions……………………..................................……….....Pages Unpacking..……………………………..............................………….....Page Description………………………………..................................………..Pages Assembly and Adjustments………………………………......................Pages Operation...................………………………..................................
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS cont. ! WARNING: if correctly used, this cordless trimmer is an easy to ! WARNING: BE SURE to read and understand all instructions in this handle and efficient tool; if used improperly or without the due precautions it could become a dangerous tool. For pleasant and safe work, ALWAYS strictly comply with the safety rules that are contained in this manual. manual before using this cordless trimmer.
SAFETY INSTRUCTIONS cont. SAFETY INSTRUCTIONS cont. ELECTRICAL SAFETY cont. 3. Do not abuse the cord on the charger. Never carry the charger by its power cord. Never pull the power cord to remove the charger from the power outlet. Damage to the cord or charger could occur and create an electric shock hazard. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.
SAFETY INSTRUCTIONS cont. SAFETY INSTRUCTIONS cont. SAFETY RULES FOR CORDLESS TRIMMERS cont. 26. BEFORE using the trimmer, remove any stones, sticks, debris or objects that could be entangled in or thrown by the trimmer. 27. NYLON CUTTING LINE Keep face, hands and feet clear of rotating nylon line at all times. 28. THE ROTATING LINE PERFORMS A CUTTING FUNCTION. Use care when trimming around screens and flowers and other objects that you DO NOT want damaged or cut. 29.
UNPACKING (Fig. 1) SAFETY INSTRUCTIONS cont. SAFETY RULES FOR BATTERY CHARGER cont. 10. Do not disassemble charger. Take it to a qualified service dealer when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. 11. Disconnect charger from the power supply when not in use. This will reduce the risk of electric shock or damage if metal items should fall into the opening in the charger. It also will help prevent damage during a power surge. 12.
DESCRIPTION cont. DESCRIPTION KNOW YOUR CORDLESS TRIMMER (Fig. 2) NOTE: Before attempting to use this product, familiarize yourself with all operating features and safety rules. KNOW YOUR CORDLESS TRIMMER cont. (Fig. 2) Fig. 2 Safety “On” Button Safety, performance and dependability have been given top priority in the design of this product, making it easy to maintain and operate. This Cordless Trimmer has the following features: Auxiliary Handle 1. 13-inch Cutting Path Trigger Switch 2.
ASSEMBLY & ADJUSTMENTS cont. DESCRIPTION cont. CHARGING THE LITHIUM-ION BATTERY PACK cont. (Fig. 3 and 3a) SPECIFICATIONS Cutting Path 13 inches Speed 7800 RPM Rating 24.0 Volt Line Diameter 0.
ASSEMBLY & ADJUSTMENTS cont. INSTALLING THE LITHIUM-ION BATTERY PACK (Fig. 4) ASSEMBLY & ADJUSTMENTS cont. INSTALLING THE SAFETY GUARD (Figs. 5 and 5a) 1. Remove the battery pack from the trimmer. 2. Turn the trimmer’s motor housing head over to provide access to underside base of the head by the cutting line spool. 3. Locate the single screw in the base of the head and remove the screw. 4.
ASSEMBLY & ADJUSTMENTS cont. ASSEMBLY & ADJUSTMENTS cont. ADJUSTING THE AUXILIARY HANDLE (Fig. 7 and 7a) ADJUSTING THE HEIGHT (Figs. 8 and 8a) NOTE: THE AUXILIARY HANDLE HAS BEEN ALREADY ATTACHED to the trimmer, but you need to adjust it to your desired position before use. 1. To release the auxiliary handle, unlock/open the Quick Release Auxiliary Bracket. (see Fig. 7) 2.
ASSEMBLY & ADJUSTMENTS cont. TO USE TRIMMER FOR EDGING: ROTATE REAR HANDLE AND UPPER SHAFT 180° (Figs. 10, 11, 11a and 11b) Fig. 10 Use as trimmer 1. Remove the battery pack from the trimmer. 2. Pull bottom collar down and rotate top shaft, rear handle (and auxiliary handle) 180° 3. Release bottom collar to lock shaft in place. Fig. 11 Fig. 11a OPERATION cont. TRIMMING AND EDGING (Figs.
MAINTENANCE OPERATION cont. ! CAUTION: Before you begin trimming, only use the appropriate type of cutting line. OPERATING TIPS 1. Before each use make sure the protective safety guard is tightly installed. Tighten the guard screw, but DO NOT over tighten. 2. Be sure to check the auxiliary handle before each use, to make sure it is firmly tightened. 3. Before trimming, inspect the area for string, wire, branches, rocks, toys, or other objects that could be entangled in or thrown by the cutting line. 4.
CONTAINS LITHIUM-ION BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY. BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING To preserve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion batteries. Local, state or federal laws may prohibit disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and / or disposal options.
1 2 3 4 9 12 13 14 16 17 18 21 22 23 30 31 32 33 35 36 38 39 40 41 Position No. CGT244LU-1 CGT244LU-2 CGT244LU-3 CGT244LU-4 CGT244LU-9 CGT244LU-12 CGT244LU-13 CGT244LU-14 CGT244LU-16 CGT244LU-17 CGT244LU-18 CGT244LU-21 CGT244LU-22 CGT244LU-23 CGT244LU-30 CGT244LU-31 CGT244LU-32 CGT244LU-33 CGT244LU-35 CGT244LU-36 CGT244LU-38 CGT244LU-39 CGT244LU-40 CGT244LU-41 Parts No. Model No. 172.
