Installation Guide

HAZARDS ASSOCIATED WITH HOT APPLIED

MATERIALS: Skin contact with hot materials can cause

burns. Over exposure to fumes may cause respiratory tract

irritation, nausea, or headaches. Precautions are to be taken

to prevent contact with hot material and to avoid inhalation

of fumes for everyone in the vicinity.

Safety precautions should include:

1. Protective clothing to prevent skin contact with hot material.

2. Care when adding product to melters to reduce splashing.

3. Careful operation of wands or pour pots used to

apply product.

4. Traffic and pedestrian control measures which meet or

exceed local requirements to prevent access to work areas

while product is in a molten state.

5. Avoidance of material fumes.

6. Proper application configurations with a minimum amount

of material excess.

7. Appropriate clean up of excessive applications or product spills.

ADDITIONAL INFORMATION: Additional information

on FLEX-A-FILL PROFESSSIONAL GRADE is contained

on the Product Data Sheet and Safety Data Sheet (SDS), which

are available at