Network Cables User Manual

CRADLEPOINT CBA750| USER MANUAL Firmware ver. 1.9.0

o MSCHAPv2

o PAP

o CHAP

 TTLS Username.

 TTLS Password.

 Verify TTLS Password.

 TTLS Client Identity.

o Modem MAC Address (Default.)

o Custom

If you select “Custom”, fill in the custom client identity field.

Dual WiMAX/3G Settings

Connect Mode. Select the preferred connection

method when using a dual WiMAX/3G modem.

 Auto. Try WiMAX first then 3G (see Dual

WiMAX/3G Reconnect Policy below to

configure the conditions under which a

WiMAX connection should be reattempted if

connected 3G).

 3G Only. Only connect 3G (WiMAX is

disabled).

 WiMAX Only. Only connect WiMAX (3G is

disabled).

Reconnect Policy. When in Auto Connect Mode with an active 3G connection, this setting specifies under what

conditions a WiMAX connection should be reattempted. The policy can be based on current 3G data rate or on time (see

Data Rate Threshold and Duration Threshold below). Several predefined settings for Data Rate Threshold and Duration

Threshold are available for ease of configuration. Note: some dual mode modems can leave the 3G connection active

while attempting the WiMAX connection. Others must disconnect the 3G connection first.