Cradlepoint WIPIPE CBA750 : Network Cables User Manual : Page 36

CRADLEPOINT CBA750| USER MANUAL Firmware ver. 1.9.0

5.1 Info

This page displays information about any attached modems.

The amount of information displayed depends on the

particular modem, but generally about a dozen to two dozen

values are displayed. To understand what particular values

such as "Home Address" or "Network Access Identifier"

mean, please review information provided by your carrier. Of

particular interest are the “Signal Strength” readings: these

let you know the quality of the attached modem connection to

your carrier. You may be able to move the location of the

router or modem to increase your signal strength. Please

note that if any of the values are displayed in red, you will

need to correct the condition before you can access the

WAN link across that phone/modem.

If your phone/modem does not support reading diagnostics

such as signal strength while it is connected to the carrier's

network, a "Refresh" button will show up on the page. If you

press this button, any current data connection will be

terminated, new readings will be presented, and a new data

connection will be made. This is equivalent to pressing the

router's external Signal Strength (SGNL) button. Again, note

that the data connection will be lost and any attached

devices will be momentarily interrupted if they are accessing

the WAN using the phone/modem.