USB/Ethernet Charging Cradle CradlePoint, Inc. 1199 W Shoreline Ln Suite #301 Boise, ID 83702 Phone: (208) 424-5054 Fax: (208) 429-6852 www.cradlepoint.
CradlePoint USB/E thernet Charging Cradle User Guide Copyright© 2008 CradlePoint, Inc. All rights reserved. The information in this document is subject to change without notice. Disclaimer CradlePoint, Inc. assumes no responsibility for any damage or loss resulting from the use of this User Guide. CradlePoint, Inc. assumes no responsibility for any loss or claims by third parties that may arise through the use of this product. CradlePoint, Inc.
CradlePoint USB/Ethernet Charging Cradle User Guide Contents CONTENTS .......................................................................................... III Introduction.............................................................................................. 1 Setting up the PS6SMC3000/70UE ............................................................... 2 Power Connection ................................................................................... 2 Operating the Cradle ................
CradlePoint USB/E thernet Charging Cradle User Guide Introduction This manual describes the set up and operation of the PS6SMC3000UE & PS6SMC70UE Single-slot Ethernet and USB charging cradles. These cradles serve as essential data communications devices, enabling you to communicate between your Symbol® MC3000 or MC70 series terminals and your Host Computer or your network.
CradlePoint USB/E thernet Charging Cradle User Guide Setting up your cradle Setting up your cradle is easy and includes only these simple steps. 1. Power Connection 2. Communication Connection: a. Connect the USB cable to another USB device (host or peripheral), or b. Connect the Ethernet cable (if you want to communicate with a remote location via the network) Power Connection To connect power to your cradle: Connect the barrel end of the power adapter into the power jack on the rear of the cradle.
CradlePoint USB/E thernet Charging Cradle User Guide Operating the Cradle The cradle helps you perform three basic functions: 1. Communication 2. Charge your handheld terminal 3. Charge your spare battery Setting Your Communication Path The switch on the side of the cradle can be set in either of two positions: NETWORK Move the switch to the left-hand position for NETWORK communications. While in this position, you will be able to communicate via your network, to a networked device or the internet.
CradlePoint USB/E thernet Charging Cradle User Guide Choosing a Communication Connection Before you prepare the cradle to communicate, you must decide which type of communication you desire: (1) direct communication with a USB device or (2) communication with a remote location via your network.
CradlePoint USB/E thernet Charging Cradle User Guide Communication with a Remote Location To connect your terminal with data on a corporate database or another device via your network, follow these simple steps: Connect one RJ45 end of a standard Ethernet cable to the RJ45 connector on the back of the cradle. Connect the other RJ45 end into your hub, router, switch, or wall data port. Slide the Network/USB switch on the side of the cradle to the left so that it indicates NETWORKcommunications.
CradlePoint USB/E thernet Charging Cradle User Guide Charging Your Handheld Terminal’s Battery The cradle may also be used to charge the handheld terminal’s battery. To charge the terminal's battery: 1. Ensure the cradle is powered on. 2. Insert the terminal in the cradle as shown. a. The Terminal Battery Charge LED will “Slow Blink Amber” to indicate that the terminal is charging. b.
CradlePoint USB/E thernet Charging Cradle User Guide Product/Technical Support CradlePoint is committed to providing its customers with first-class customer service and technical support. For your convenience, a few troubleshooting techniques are provided below that might help you fix your problem quickly and easily. If you have a different issue, or if you have tried these and they didn’t resolve your problem, please feel free to contact Technical Support at: CradlePoint, Inc.
CradlePoint USB/E thernet Charging Cradle User Guide Symptom: Attempt to synchronize the terminal through USB failed. Possible Cause The host computer cannot find the terminal. The terminal was removed from the cradle while the synchronization was in progress. Action Make sure you have successfully installed ActiveSync software and created a Partnership between the terminal and the host computer. (See your Symbol documentation for more information if you need help with ActiveSync.
CradlePoint USB/Ethernet Charging Cradle User Guide Symptom: Terminal cannot communicate through the network. Possible Cause The Ethernet cable is not connected properly. Action Check to be sure the Ethernet cable is connected securely to the cradle and to hub, router, switch, or wall data jack. Try a different Ethernet jack on the hub, router, switch, or a different wall data port. The cradle is not getting power.
CradlePoint USB/E thernet Charging Cradle User Guide Appendix A – Regulatory Information Radio Frequency Interference Requirement FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CradlePoint USB/E thernet Charging Cradle User Guide Appendix B – Warranty CradlePoint, Inc. warrants this product against defects in materials and workmanship to the original purchaser (or the first purchaser in the case of an authorized resller) for a period of one (1) year from the date of shipment. This warranty is limited to a repair or replacement of the product. To obtain warranty service, the purchaser must first call CradlePoint, Inc. for an RMA number, then return the product to CradlePoint, Inc.
CradlePoint USB/Ethernet Charging Cradle User Guide CradldePoint, Inc 12
CradlePoint USB/E thernet Charging Cradle User Guide CradlePoint, Inc. 1199 W Shoreline Ln Suite #301, Boise, ID 83702, USA Phone (208) 424-5054 • Fax (208) 429-6852 Email: support@cradlepoint.com • www.cradlepoint.
