Network Router User Manual

ManualsBrandsCradlepoint ManualsNetwork RouterMBR1400LE

Summary of content (175 pages)

PAGE 1
PAGE 2
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Preface CradlePoint reserves the right to revise this publication and to make changes in the content thereof without obligation to notify any person or organization of any revisions or changes. Manual Revisions Revision Date Description Author 1.0 July 28, 2011 Initial release for Firmware version 3.2.4 Jeremy Cramer 1.1 Aug. 22, 2011 Added features for Firmware version 3.3.0 Jeremy Cramer 1.2 Jan.
PAGE 3
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Table of Contents 1 INTRODUCTION ................................................................ 3 1.1 1.2 1.3 1.4 2 3 BASIC SETUP ...................................................................... 15 CONNECT TO A COMPUTER OR OTHER DEVICE .......................... 16 COMMON PROBLEMS .......................................................... 19 ADMINISTRATOR LOGIN .......................................................
PAGE 4
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 8.4 MANAGED SERVICES ASK YOUR CRADLEPOINT SALES REPRESENTATIVE FOR DETAILS ............................................. 149 8.5 SERIAL REDIRECTOR........................................................... 152 8.6 SYSTEM CONTROL ............................................................. 154 8.7 SYSTEM SOFTWARE ........................................................... 155 9 GLOSSARY....................................................................
PAGE 5
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 1 INTRODUCTION 1.1 Package Contents        CradlePoint Mission-Critical Broadband Router (MBR1400) AC power adapter (12V, 1.5A) WARNING: using a power adapter other than the one provided may damage the MBR1400 and will void the warranty Three 2.4 GHz High Performance 802.
PAGE 6
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1  Compatible with Cisco, Juniper, and other industry-leading network hardware providers ENHANCED WIFI  750+ feet of WiFi Range  Wireless ―N‖ WiFi (802.11n, 802.11a + legacy 802.11b/g, 3x3 MIMO Antenna system)  Enhanced performance around walls and other obstructions  Dual-Band WiFi broadcast - either 2.4 GHz or 5.
PAGE 7
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Designed for small business, branch office, and retail locations - our business series router provides a secure primary or backup connection to the Internet.
PAGE 8
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 1.4 CradlePoint ARC MBR1400 Series Includes a CradlePoint 3G/4G Business Grade Modem with the MBR1400 and creates an effortless instant network from highspeed wireless broadband. The CradlePoint Integrated Business Grade Modems are specifically designed to provide the highest level of performance, reliability, and security for 24x7 business-critical applications. Modems can be located and oriented to receive the highest signal strength.
PAGE 9
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 MBR1400LE-VZ 4G LTE/EVDO for Verizon Technology: LTE 3GPP Rel. 8 , EVDO RevA, A/O; CDMA 1x Downlink Rates: LTE 100 Mbps, EVDO 3.1 Mbps (theoretical) Uplink Rates: LTE 50 Mbps, EVDO 1.
PAGE 10
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 MBR1400E-VZ 3G EVDO for Verizon Technology: EVDO RevA, A/O; CDMA 1x Downlink Rates: 3.1 Mbps (theoretical) Uplink Rates: 1.8 Mbps (theoretical) Frequency Band: Cellular/PCS (800MHz/1,900 MHz) Power: 24 +/- 0.
PAGE 11
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 MBR1400E-SP 3G EVDO for Sprint Technology: EVDO RevA, A/O; CDMA 1x Downlink Rates: 3.1 Mbps (theoretical) Uplink Rates: 1.8 Mbps (theoretical) Frequency Band: Cellular/PCS (800MHz/1,900 MHz) Power: 24 +/- 0.
PAGE 12
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 MBR1400W-SP 4G WiMAX for Sprint Technology: WiMAX 802.16e Wave 2 Downlink Rates: 10Mbps peak, 6Mbps average Uplink Rates: 5 Mbps peak, 1.2 Mbps average Frequency Band: 2,500 MHz band Power: 23.5 +/- 0.
PAGE 13
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 2 HARDWARE OVERVIEW © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 14
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 2.1 Ports, Buttons, and Switches © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 15
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 LAN and WAN Ports: By default, the four orange ports are configured as LAN (Local Area Network) ports and the blue port is configured as a WAN (Wide Area Network—your Internet source) port. Any LAN port, however, can be reconfigured as a WAN port and vice versa. Modem Ports: The MBR1400 has three USB 2.0 ports and two ExpressCard ports. WiFi Antenna Connectors: Your router comes with three 2.4 GHz WiFi antennas (Reverse SMA).
PAGE 16
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 2.2 LEDs LAN and WAN LEDs: The default settings are shown. LAN ports can be reconfigured to function as WAN ports and vice versa; the LEDs will function accordingly. © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 17
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 3 QUICK START 3.1 Basic Setup    Your router requires an Internet source. Attach a CradlePoint Business Grade Modem, insert supported USB or ExpressCard modem/s, connect a Cable or DSL modem to the Blue Ethernet WAN port, or connect to an available WiFi source. For Failover/Failback functionality, you will need at least two of these sources (for example: one Ethernet source and one USB modem).
PAGE 18
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 3.2 Connect to a Computer or other Device 3.2.1 Wireless Network Connection 1) Find the network. On a WiFi-enabled computer or device, open the window or dropdown menu that allows you to access wireless networks. The MBR1400 network will appear on the list: select this network. 2) Log in. You will need to input the Default Password when prompted.
PAGE 19
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 3.2.2 Accessing the Administration Pages For most users, the MBR1400 Router can be used immediately without any special configuration changes.
PAGE 20
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 3.2.3 Connect to the Internet If you used the First Time Setup Wizard, you might have changed the ―WiFi Network Name‖ or the ―Security Mode‖ password. If so, you will need to reconnect to the MBR1400 network.   Find the network. Look for your new personalized network name (or the default SSID of the form ―MBR1400-xxx‖). Log in using your new personalized WiFi security password (or the Default Password found the bottom of the router).
PAGE 21
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 3.3 Common Problems This section contains a list of some of the most common issues faced by users of the MBR1400. Please visit CradlePoint Knowledgebase at http://knowledgebase.cradlepoint.com/ for more help and answers to your other questions. 3.3.1 You Cannot Connect to the Internet with a CradlePoint Business Grade Modem Make sure that you have an active data plan and that your modem has been activated.
PAGE 22
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 3.3.2 Your USB or ExpressCard Modem Does Not Work With the Router  If your USB data or ExpressCard is not working with the router, check the list of supported devices at http://www.cradlepoint.com/modems to ensure you are using a supported device and carrier. The device you are using must be supported on the carrier network providing your cellular service or it‘s considered an unsupported device, even if it is supported on another carrier‘s network.
PAGE 23
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 of the page). Then log in to the router administration pages and manually upload the firmware. Go to System Settings → System Software and click on ―Manual Firmware Upload‖.  If you are still unable to access the Internet after following the above directions, contact CradlePoint Technical Support for further assistance. © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 24
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 3.3.3 You are Connected to the Router but Cannot Connect to the Internet The status LEDs of your router will give you an indication whether or not a proper connection is being made. See the LED STATUS definitions below: If the data modem LEDs are not illuminated, your modem is not connected and online. You may need to update firmware. Refer to the previous section, ―Your USB or ExpressCard Modem Does Not Work With The Router.
PAGE 25
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 4 WEB INTERFACE -- ESSENTIALS The MBR1400 has a Web interface for configuration and administration of all features. The interface is organized with a button for toggling between Basic Mode and Advanced Mode and 5 tabs at the top of the screen:      Getting Started Status Network Settings Internet System Settings Web Interface – Essentials contains the following sections to help you more quickly and easy navigate these administration pages: 4.
PAGE 26
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 4.1 Administrator Login To access the administration pages, open a Web browser and type the hostname ―cp/‖ or IP address ―http://192.168.0.1‖ into the address bar. The Administrator Login page will appear. Log in using your administrator password. Initially, this password can be found on the bottom of the MBR1400 unit as the Default Password. This password is also the last eight digits of the unit‘s MAC address. © 2012 CRADLEPOINT, INC.
PAGE 27
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 You may have changed the administrator password during initial setup using the First Time Setup Wizard. Log in using your personalized administrator password. If you have forgotten your personalized password, you can reset the MBR1400 to factory defaults. When you reset the router, the administrator password will revert back to the Default Password. Press and hold the reset button on the router unit until the lights flash (Approximately 10-15 seconds).
PAGE 28
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 4.2 Getting Started – First Time Setup The First Time Setup Wizard will help you customize the name of your wireless network, change passwords to something you choose, and establish an optimal WiFi security mode. The MBR1400 comes out of the box with a unique password at WPA1/WPA2 WiFi security level. NOTE: Instructions for the First Time Setup Wizard are also located in the Setup Guide included with the MBR1400.
PAGE 29
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6) CradlePoint recommends that you customize your WiFi Network Name. Type in your personalized Network name here. You can also enable the Guest Network feature (for more configuration options, see Network Settings → WiFi / Local Networks and the Wireless (WiFi) Network Settings section of this manual). Choose the WIFI SECURITY MODE that best fits your needs:     BEST (WPA2): Select this option if your wireless adapters support WPA2-only mode.
PAGE 30
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Choose a personalized WPA PASSWORD or WEP KEY. This password will be used to connect devices to the router‘s WiFi broadcast once the security settings have been saved.   WPA Password: The WPA Password must be between 8 and 64 characters long. A combination of upper and lower case letters along with numbers and special characters is recommended to prevent hackers from gaining access to your network.
PAGE 31
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7) If you are using a 4G WiMAX modem, you will want to establish the Realm for your carrier. This setting ensures that the modem, when attached to the router, will properly connect to your carrier‘s wireless broadband service. The MBR1400 will default to the Sprint Realm. Select your carrier from the dropdown menu (options shown below).        Clear - clearwire-wmx.net Rover - rover-wmx.net Sprint 3G/4G - sprintpcs.com Xohm - xohm.
PAGE 32
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 8) Review the details and record your wireless network name, administrative password, and WPA password (or WEP key). Move your mouse over the passwords to selectively reveal each password. Please record these settings for future access. You may need this information to configure other wireless devices.
PAGE 33
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 4.3 Quick Links The CradlePoint logo in the upper left-hand corner of all the administration pages is a link to the Dashboard (Status → Dashboard), which displays fundamental information about the router. The black bar across the top provides quick access to important information and controls.
PAGE 34
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.0 4.4 Configuration Pages The following table shows the navigation layout of the administration pages. Click on the tabs along the top bar to reveal the following dropdown menus.
PAGE 35
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.0 System Settings – Provides broad administrative controls. For example, you can set up a Terms of Use page for your guest network (Hotspot Services), enable remote management of the router (Administration), or upgrade firmware (System Software). 4.4.1 Network Settings vs. Internet When using the Web interface, it will be important to pay attention to the difference between the Internet source for your MBR1400 and the network created by the MBR1400.
PAGE 36
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 5 STATUS The Status tab displays information about many different aspects of the router. It provides access to 8 submenu options:         Client List Dashboard GPS GRE Tunnels Internet Connections Statistics System Logs VPN Tunnels © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 37
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 5.1 Client List The Client List displays the specifications of each device connected to your router, including Wireless and Wired clients. Wireless Clients. For each device using a wireless connection to your MBR1400, the following information is displayed: Hostname, IP, MAC, Connection, and Time Online. Wired Clients. For each device using a wired connection to your MBR1400, the following information is displayed: Hostname, IP, and MAC.
PAGE 38
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1  -26 dBm: A relative measure of wireless signal quality (decibels relative to one milliwatt). This expresses theoretical best quality. The value is given as a negative exponent: -20 is a very good value while -80 is relatively poor. Signal quality can be reduced by distance, by interference from other radio-frequency sources (such as cordless telephones or neighboring wireless networks), and by obstacles between the router and the wireless device.
PAGE 39
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 5.2 Dashboard The Dashboard shows fundamental information about your router, divided into the following basic categories:     Router Information Internet Local Networks WiFi Networks For more in-depth information and/or configuration options, click on the Detailed Info link beside the category title.
PAGE 40
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Router Information: “Detailed Info‖ links to System Settings → Administration.       Product: MBR1400 Firmware: Gives the number of the current firmware version. Build Date: Year-month-day-hours-minutes-seconds for the most recent firmware upgrade. CPU Usage: Expressed as a percentage. Up Time: Total time for current session. Clock: Current local date and time. To check for Firmware upgrades, see System Settings → System Software.
PAGE 41
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Local Networks: “Detailed Info‖ links to Network Settings → WiFi / Local Networks.  Clients: The number of current clients. For each network, the following information is displayed:  Network Name: IP Address/Netmask o Route Mode: NAT (Network Address Translation), Standard (NAT-less), Hotspot, or Disabled. o Access: Admin Access, LAN Isolation, UPnP (Universal Plug and Play), and/or DHCP.
PAGE 42
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 5.3 GPS If GPS support is enabled and a modem capable of providing GPS coordinates is connected, this page will show a graphical view of your router's location. See the GPS section in System Settings → Administration to enable GPS support. GPS information is only displayed if 1) the modem supports GPS, 2) your carrier allows the GPS functionality, and 3) the modem has sufficient GPS signal strength.
PAGE 43
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 5.4 GRE Tunnels View the status of configured GRE Tunnels. To set up or edit a GRE tunnel, go to Internet → GRE Tunnels. Included information:  Name  Status  Transmit (packets/bytes)  Receive (packets/bytes) © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 44
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 5.5 Hotspot Clients View the status of the clients that have logged in through the Hotspot/Captive Portal. View:  Hostname  IP address  MAC address  Data Usage (both IN and OUT)  Time Online  You may revoke a client's access to the Internet by clicking the 'Revoke' button. © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 45
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 5.6 Internet Connections The Internet Connections submenu option provides a list of attached WAN devices used as the Internet source for the MBR1400. Select one of these devices to see detailed information about that particular device. For each type of device, different information will be included in the Device Information section.
PAGE 46
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 5.6.1 Ethernet General Information     Unique Identifier wan Model Type ethernet Port IP Information    DNS Servers IP Address Gateway Statistics    Incoming Bytes Outgoing Bytes Connection Uptime (secs) © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 47
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 5.6.2 WiFi as WAN Diagnostics  Connection State (connected, idle, etc.) General Information    Product Wireless As WAN Unique Identifier Type wwan IP Information    Netmask IP Address Gateway © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 48
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 5.6.3 GSM Modem (Nokia Datacard) Diagnostics         Signal Error Rate Modem Firmware Version Battery Status Battery Level Carrier Status Signal Strength(dBm) PIN Status Connection State (connected, idle, etc.
PAGE 49
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1    Incoming Bits/Second Incoming Bytes Outgoing Bytes © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 50
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 5.6.4 EVDO Modem: (MC760 Comcast) Diagnostics        Modem Firmware Version PRL Version Service Display EVDO Carrier Status Signal Strength(dBm) Connection Type CDMA Connection State (connected, idle, etc.) General Information         Product MC769 COMCAST Protocol PPP Unique Identifier ESN/IMEI Model MC760 COMCAST Type modem Port Manufacturer Novatel Wireless Inc.
PAGE 51
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1  Outgoing Bytes © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 52
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 5.6.5 WiMAX Modem (U300 – 4G) Diagnostics For a WiMAX modem, the CINR and Signal Strength values are important as they show how strong the signal is and that has significant effects on how much data the router can download or send. You can place the router in different locations to see where you get better signal. You can also see a LED display of the current signal strength.
PAGE 53
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1    Type WiMAX Port Manufacturer Franklin Wireless Corporation Statistics     Outgoing Bits/Second Incoming Bits/Second Incoming Bytes Outgoing Bytes © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 54
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 5.6.6 LTE Modem (PANTECH UML290) Diagnostics                   Home Address MN-HA SPI Modem Firmware Version Battery Status MN-HA SS Network Address Identifier (NAI) Signal Strength(dBm) Rev Tun Battery Level Secondary Home Agent Service Display LTE Primary Home Agent Carrier Status Profile MN-AAA SPI PIN Status MN-AAA SS Connection State (connected, idle, etc.) © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.
PAGE 55
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 General Information         Product PANTECH UML290 Protocol IP DHCP Unique Identifier ESN/IMEI Model UML290VW Type modem Port Manufacturer Pantech, Incorporated IP Information    Netmask IP Address Gateway Statistics     Outgoing Bits/Second Incoming Bits/Second Incoming Bytes Outgoing Bytes © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 56
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 5.7 Statistics The Statistics submenu option displays basic traffic statistics for both LAN and WAN connections, separating Outgoing Traffic and Incoming Traffic. Data Rate: A measure of the amount of information that is currently being sent or received through the network. Data: A measure of the total amount of information that has been sent or received. Packets: The number of network packets that have been sent or received.
PAGE 57
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 5.8 System Logs The router automatically logs (records) events of possible interest in its internal memory. If there is not enough internal memory for all events, logs of older events are deleted, but logs of the latest events are retained. The log options allow you to filter the router logs so you can easily find relevant messages.
PAGE 58
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 5.9 VPN Tunnels View the status of configured VPN tunnels. To set up or edit a VPN tunnel, go to Internet → VPN Tunnels. Included information:  Name  Connections  Status  Protocols  Transferred  Direction  Time Online  Control © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 59
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6 NETWORK SETTINGS The Network Settings tab provides access to 8 submenu options for administering the following functions/tasks. These functions are all related to controlling the LAN (Local Area Networks), the networks you set up with the MBR1400.         Content Filtering DHCP Server DNS Firewall MAC Filter Routing WiFi / Local Networks WiPipe QoS © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 60
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6.1 Content Filtering You have two main options for filtering content in a network created through your MBR1400. 1) Domain / URL Filter Rules: Create a list of websites that will be either disallowed (facebook.com, for example) or allowed exclusively (your company‘s website, for example). 2) OpenDNS Content Filtering: Allows several options for filtering rules. To create Domain / URL Filter Rules, simply input one or more website domain names or URLs.
PAGE 61
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6.1.1 OpenDNS OpenDNS is a service that protects you online by filtering websites. OpenDNS protects you from phishing websites and URL typos once you select a filtering level.       None: Disables Web filtering that uses OpenDNS, Minimal: Filters phishing and URL typos. Good: Filters any Web site containing pornography and enables typo and phishing redirection. Better: Filters more nudity, sexuality, and tasteless content.
PAGE 62
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 OpenDNS network. In order for Custom settings to work you need to login to DNS-O-MATIC using your OpenDNS credentials and "Add A Service" for the network specified above. Enable OpenDNS ISP Filter Bypass Algorithm: It is possible that your Internet Service Provider (ISP) uses the port that OpenDNS is configured to access, port 53, which will prevent OpenDNS filtering.
PAGE 63
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6.2 DHCP Server DHCP stands for Dynamic Host Configuration Protocol. The built-in DHCP server automatically assigns IP addresses to the computers and other devices on each local area network (LAN). In this section you can view a list of assigned IP addresses and reserve IP addresses for particular devices. Active Leases: A list of devices that have been provided DHCP leases. The DHCP server automatically assigns these leases.
PAGE 64
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6.3 DNS DNS, or Domain Name System, is a naming system that translates between domain names (www.cradlepoint.com, for example) and Internet IP addresses (206.207.82.197). A DNS server acts as an Internet phone book, translating between names that make sense to people and the more complex numerical identifiers.
PAGE 65
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Force All DNS Requests To Router: Enabling this will redirect all DNS requests from LAN clients to the router's DNS server. This will allow the router even more control over IP addresses even when clients have their own DNS servers statically set. 6.3.2 Dynamic DNS Configuration The Dynamic DNS feature allows you to host a server (Web, FTP, etc.) using a domain name that you have purchased (www.yourname.com) with your dynamically assigned IP address.
PAGE 66
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 User name: Enter the user name or key provided by the Dynamic DNS service provider. If the Dynamic DNS provider supplies only a key, enter that key for both the User name and Password fields. Password: Enter the password or key provided by the Dynamic DNS service provider. 6.3.3 Advanced Dynamic DNS Settings Update period (hours). (Default: 576) The time between periodic updates to the Dynamic DNS, if your dynamic IP address has not changed.
PAGE 67
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6.4 Firewall The router automatically provides a firewall. Unless you configure the router to the contrary, the router does not respond to unsolicited incoming requests on any port, thereby making your LAN invisible to cyber attackers. However, some network applications cannot run with a tight firewall. Those applications need to selectively open ports in the firewall to function correctly.
PAGE 68
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1    Local Port(s): The port number(s) that corresponds to the service (Web server, FTP, etc) on a local computer or device. For example, you might input ―80‖ in the Local Port(s) field to open a port for a Web server on a computer within your network. The Internet Port(s) field could then also be 80, or you could choose another port number that will be used across the Internet to access your Web server.
PAGE 69
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6.4.2 IP Filter Rules (Advanced) An "Incoming" IP filter rule restricts remote access to computers on your local network. "Outgoing" filter rules prevent computers on your local network from initiating communication to the address range specified in the rule. This feature is especially useful when combined with port forwarding and/or DMZ to restrict remote access to a specified host or network range.
PAGE 70
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 If you leave these values blank, then all IP addresses and ports will be included. IP Source and IP Destination options can be used to differentiate between the directions that packets go. You could permit packets to come from particular IP addresses but then not allow packets to return to those addresses. Example of an IP Filter Rule: Suppose you have opened a port in your firewall in order to run a server.
PAGE 71
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6.4.3 DMZ: DeMilitarized Zone (Advanced) A DMZ host is effectively not firewalled in the sense that any computer on the Internet may attempt to remotely access network services at the DMZ IP address. Typical uses involve running a public Web server or sharing files. Input the IP Address of a single device in your network to create a DeMilitarized Zone for that device.
PAGE 72
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6.5 MAC Filter The MAC Filter allows you to create a list of devices that have either exclusive access (whitelist) or no access (blacklist) to your wireless LAN. Enabled: Click to allow MAC Filter options. Whitelist: Select either ―Whitelist‖ or ―Blacklist‖ from a dropdown menu. In "Whitelist" mode, the router will restrict WiFi access to all computers except those contained in the "MAC Filter List" panel.
PAGE 73
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6.6 Routing Add a new static route to the IP routing table or edit/remove an existing route. Static routes are unnecessary for most users. They are typically only used in networks with more than one layer, such as when there is a network within a network so that packet destinations are hidden behind an additional router.
PAGE 74
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6.7 WiFi / Local Networks This section is used to configure the settings for wireless networks created by your router. Note that changes made in this section may also need to be duplicated on wireless devices that you want to connect to your wireless network. For example, if you change a LAN‘s IP address, devices within that network will lose connection. They will have to reconnect to the network. Firmware 3.3.
PAGE 75
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6.7.1 Local IP Networks Local IP Networks displays the following information for each network:       Network Name IP address/Netmask DHCP Server (Enabled/Disabled) Routing Mode (NAT, Standard, Hotspot, Disabled) Access Control (Admin Access, UPnP Gateway, LAN Isolation) Attached Interfaces (Ethernet ports, WiFi, VLAN) Click Add to configure a new network, or select an existing network and click Edit to view configuration options.
PAGE 76
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6.7.2 Local Network Editor The Local Network Editor contains the following tabs: IP Settings, Interfaces, Access Control, and DHCP Server. IP Settings: Name: This primarily helps to identify this network during other administration tasks. Hostname: [Default: cp (for CradlePoint)] The hostname is the DNS name associated with the router's local area network IP address.
PAGE 77
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1     NAT (default): Network Address Translation hides private IP addresses behind the router's IP address. This is the simplest and most common choice for users, because NAT does the translation work for you. Standard: NAT-less routing. If you select Standard, you must separately configure your IP addresses so that they will be publically accessible. Typically you will not select this option unless you have a specific reason to bypass NAT.
PAGE 78
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Access Control: Tune the access control settings of this network to match the intended use. Simply select or deselect any of the following:    LAN Isolation: When checked, this network will NOT be allowed to communicate with other local networks. UPnP Gateway: Select the UPnP (Universal Plug and Play) option if you want to enable the UPnP Gateway service for computers on this network.
PAGE 79
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 DHCP Server: Changing settings for the DHCP server is optional. The default selections are almost always sufficient. DHCP Server: (Default: Enabled) When the DHCP server is enabled, users of your network will be able to automatically connect to the Internet without any special configuration. It is recommended that you leave this enabled.
PAGE 80
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 DHCP Options: Input a custom DHCP option by first clicking ―Add‖. There are close to 200 possible DHCP options available. One of the more common uses is to assign a VoIP phone server using option 66 (Server name). Option: Select an option from the dropdown list or manually enter the number of an option. A complete list of options is available from IANA. Value: Generally this field should be a string, IP address, or numeric value.
PAGE 81
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6.7.3 Local Network Interfaces Each LAN type—WiFi, Ethernet, and VLAN—has a separate section with configuration options. Unless the default configuration is sufficient, YOU MUST CONFIGURE EACH INTERFACE SEPARATELY in order to create the desired interface options for a network. You can then select these interfaces to add to a network in the Local Network Editor (see above).
PAGE 82
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Wireless Network Editor WiFi Name (SSID): When users browse for available wireless networks, this is the name that they will. This name is referred to as the SSID (service set identifier). For security purposes, CradlePoint highly recommends that you change this from the pre-configured name. Hidden: This shows whether the router broadcasts its SSID.
PAGE 83
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Security Mode: You have several options for selecting a security mode. The mode you choose depends on the security features your wireless adapters support.         WPA2 Personal WPA / WPA2 Personal WPA Personal WPA2 Enterprise WPA / WPA2 Enterprise WPA Enterprise WEP Auto Open Select ―Open‖ to create a hotspot: otherwise select the best security that your devices will support (CradlePoint recommends WPA2).
PAGE 84
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 NOTE: If you select one of the security modes and are unable to connect to the router afterwards, you can use the reset buttons to reset the router to its factory default state and try a different security mode instead. © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 85
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Ethernet Port Configuration Ethernet Port Configuration provides controls for your router‘s Ethernet ports. There are five total ports: one blue port and four numbered orange ports. While default settings will be sufficient in most circumstances, you have the ability to control: Mode (WAN or LAN) and Link Speed. Additional controls for WAN ports are available in Internet → Ethernet Settings. Mode: WAN or LAN.
PAGE 86
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Ethernet Port Group Editor A Port Group represents a logical grouping of Ethernet ports. Any computers physically connected to ports in a group will be allowed to freely communicate with each other. For example, if you leave all four orange ports set as LAN ports, you might group Orange Port 1 and Orange Port 2 together to be part of your primary network, and then group Orange Port 3 and Orange Port 4 together to be part of a guest network.
PAGE 87
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 VLAN Interfaces A virtual local area network, or VLAN, functions as any other physical LAN, but it enables computers and other devices to be grouped together even if they are not physically attached to the same network switch. To enable a VLAN, select a VID (virtual LAN ID) and a group of Ethernet ports through which users can access the VLAN. Then go back up to the Local Network Editor to attach your new VLAN to a network.
PAGE 88
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6.7.4 WiFi Settings (Advanced) When you select the Wireless (WiFi) Networks Settings tab in the Local Network Interfaces section, you have several additional options for configuring your wireless LANs under the WiFi Settings heading. WiFi band: Select the range of frequencies the router will use. The MBR1400 can operate in either the 2.4 GHz or the 5.0 GHz ranges. (Default: 2.4 GHz. The included WiFi antennas are 2.4 GHz.
PAGE 89
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Channel: (Shows if Random Channel is deselected.) The WiFi channel corresponds to a frequency the router uses to communicate with other devices. For 2.4 GHz, the range is 1 to 11, and 1, 6, and 11 do not overlap each other. If a WiMAX modem is attached, a higher number channel will increase the chance the router's WiFi and modem's WiMAX radios will conflict with each other, which may result in lower throughput.
PAGE 90
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 TX Power: Normally the wireless transmitter operates at 100% power. In some circumstances, however, there might be a need to isolate specific frequencies to a smaller area. By reducing the power of the radio, you can prevent transmissions from reaching beyond your corporate/home office or designated wireless area.
PAGE 91
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Wireless Mode: Select the WiFi clients the router will be compatible with. Greater compatibility is a tradeoff with better performance. For greatest compatibility with all WiFi devices, select "802.11 a/b/g/n". For best performance, connect with only other 802.11n-compatible devices and select "802.11 n."  802.11 b  802.11 b/g  802.11 a/b/g/n  802.11 b/g/n  802.
PAGE 92
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6.8 WiPipe QoS When WiPipe QoS (Quality of Service/Traffic Shaping) is enabled, the router will control the flow of Internet traffic according to the userdefined rules. In other words, Traffic Shaping improves performance by allowing the user to prioritize applications. Enable WiPipe QoS: Click on this box to open options for controlling Internet traffic. You can control Uplink Speed values or define your own Traffic Shaping rules.
PAGE 93
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Name. Create a name for the rule that is meaningful to you. Protocol. The protocol used by the messages: TCP, UDP, or ICMP. Select ―Any‖ if your rule does not control a specific type of message that uses a specific protocol. Priority. The priority of the message flow is entered here-15 receives the highest priority (most urgent) and 0 receives the lowest priority (least urgent). Enable. Specifies whether the entry will be active or inactive.
PAGE 94
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 The second page allows you to designate the computer(s) on the local network for which you want to adjust traffic priority. NOTE: Leaving a field empty will match any IP address and/or any port number. All fields are optional. Local Start Port and Local End Port: The rule applies to a flow of messages whose LAN-side port number is within the range set here. Local IP Address: The rule applies to a flow of messages with this LAN-side IP address.
PAGE 95
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 The third and last page allows you to designate the network or server on the Internet for which you want to shape traffic. NOTE: Leaving a field empty will match any IP address and/or any port number. All fields are optional. Remote Start Port and Remote End Port: The rule applies to a flow of messages whose WAN-side port number is within the range set here. Remote IP Address. The rule applies to a flow of messages with this WAN-side IP address.
PAGE 96
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7 INTERNET The Internet tab provides access to 5 submenu items for managing a variety of Internet connection options.      Connection Manager Data Usage GRE Tunnels VPN Tunnels WiFi as WAN / Bridge © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 97
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.1 Connection Manager The router can establish an uplink via the Ethernet WAN port, WiFi as WAN, or modems plugged into a modem port. If the primary WAN connection fails the router will automatically attempt to bring up a new link on another device. This feature is called failover. If Load Balance is enabled, multiple WAN devices may be plugged in and each may establish a link. 7.1.
PAGE 98
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.1.2 Device Configuration Clicking on a device reveals the following information:         State (Connected, Available, etc.) Port UID (Unique identifier. This could be a name or number/letter combination.) IP Address Gateway Netmask Stats: bytes in, bytes out Uptime (in seconds) Click ―Edit‖ to view configuration options for the selected device. For USB or ExpressCard modems, click ―Control‖ to view options to activate or update the device.
PAGE 99
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.1.3       General Settings Enabled: Select/deselect to enable/disable. Load Balance: Select to allow this device to be available for the Load Balance pool. LB default bandwidth: Defines the default bandwidth for use in Load Balance algorithms. (Range: 100 Kilobits/second to 49 Megabits/second.) QOS default bandwidth: Defines the default bandwidth for use in QoS (quality of service, or traffic shaping) algorithms.
PAGE 100
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Failure Check (Advanced) If this is enabled, the router will check that the highest priority active WAN interface can get to the Internet even if the WAN connection is not actively being used. If the interface goes down, the router will switch to the next highest priority interface available.
PAGE 101
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Failback Configuration (Advanced) This is used to configure failback, which is the ability to go back to a higher priority WAN interface if it regains connection to its network. Usage: Fail back based on the amount of data passed over time. This is a good setting for when you have a dual-mode EVDO/WiMAX modem and you are going in and out of WiMAX coverage.
PAGE 102
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.1.4 Ethernet Settings While default settings for each WAN Ethernet port will be sufficient in most circumstances, you have the ability to control:   Connect Method: DHCP (Automatic), Static (Manual), or PPPoE (Point-to-Point Protocol over Ethernet). MAC Address: You have the ability to change the MAC address, but typically this is unnecessary. You can match this address with your device‘s address by clicking: ―Clone Your PC’s MAC Address‖.
PAGE 103
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Static (Manual):  IP Address  Subnet Mask  Gateway IP  Primary DNS Server  Secondary DNS Server PPPoE:  Username  Password  Password Confirm  Service  Auth Type: None, PAP, CHAP © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 104
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.1.5 Modem Settings On Demand: Typically modem connections are not always on. When this mode is selected a connection to the Internet is made as needed. When this mode is not selected a connection to the Internet is always maintained. Maximum Idle Time: The interval for which the modem can be idle before it is disconnected. Aggressive Reset: When Aggressive Reset is enabled the system will attempt to maintain a good modem connection.
PAGE 105
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 AT+CGDCONT=2,‖IP‖,‖isp.cingular‖ ATCT*99***2# PPP Authentication Protocol: Set this only if your service provider requires a specific protocol and the Auto option chooses the wrong one.  Auto  PAP (Password Authentication Protocol)  CHAP (Challenge Handshake Authentication Protocol) PPP Password: Password for PPP authentication. PPP Username: Username for PPP authentication. © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 106
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 CDMA Settings   Persist Settings: Active Profile: Select a number from 0-5 from the dropdown list. The following fields can be left blank. If left blank they will remain unchanged in the modem.         NAI (Username@realm): Network Access Identifier. NAI is a standard system of identifying users who attempt to connect to a network. AAA Shared Secret (Password): “Authentication, Authorization, and Accounting‖ password.
PAGE 107
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 SIM/APN Settings SIM PIN: PIN number for a GSM modem with a locked SIM. Access Point Name (APN): Some wireless carriers provide multiple Access Point Names that a modem can connect to. Some APN examples are ‗isp.cingular‖ and ―vpn.com‖.    Default: Let the router choose an APN automatically. Manual: Enter an APN by hand. Select: Select from a dropdown menu of the profiles already on the SIM. © 2012 CRADLEPOINT, INC.
PAGE 108
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 WiMAX Settings WiMAX Realm: Select from the following dropdown options:        Clear – clearwire-wmx.net Rover – rover-wmx.net Sprint 3G/4G – sprintpcs.com Xohm –xohm.com BridgeMAXX – bridgeMAXX.com Time Warner Cable – mobile.rr.com Comcast – mob.comcast.net TTLS Authentication Mode: TTLS inner authentication protocol.
PAGE 109
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.1.6 Update/Activate a Modem Some 3G modems can be updated and activated while plugged into the router. Updates and activation methods vary by modem model and service provider. Possible methods are: PRL Update, Activation, and FUMO. All supported methods will be displayed when you select your modem and click ―Update/Activate‖. If no methods are displayed for your device then you will need to update and activate your device externally.
PAGE 110
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Process Timeout: If the process fails an error message will display. Activation has a 3-minute timeout, PRL update has a 4-minute timeout, and FUMO has a 10-minute timeout. 7.1.7 Configuration Rules (Advanced) This section allows you to create general rules that apply to the Internet connections of a particular type. These can be general or very specific.
PAGE 111
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 WAN Configuration Rule This section allows you to create simple or complex rules that affect how individual Internet sources or classes of sources (perhaps all WiMAX modems or all modems from Sierra Wireless) behave in the router. After clicking ―Add‖ or ―Edit,‖ you will see a popup with the following tabs:        Filter Criteria General Settings Ethernet Settings Modem Settings WiMAX Settings CDMA Settings SIM/APN Settings Filter Criteria.
PAGE 112
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Value: If you chose Port or Type, select from the dropdown list. If you chose Manufacturer, Model, Serial Number, MAC Address, or Unique ID, you will need to manually input the information. The condition will be of the following form: ― (When) is/is not (value) ‖ For example: ―Type is not WiMAX‖ ―Port is USB Port 1‖ Once you have established the condition for your configuration rule, choose from the other tabs to set the desired configuration.
PAGE 113
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.2 Data Usage Data Usage Management & Alerts allows you to create and manage rules that help control the data usage of a modem. If you have a limited data plan or a price increase on your plan after a certain amount of usage, a Data Usage Rule can help you track these amounts. You can set a rule to shut down use of a modem and/or send a message when you reach a data usage amount you set. Enable Data Usage: Enabled/Disabled. (Default: Disabled.
PAGE 114
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.2.1 Data Usage Rules The Date Usage Rule display shows basic information for each rule you have created (including rules created with a template). The following information is displayed:       Rule Name Enabled: True/False Date for Rule Reset Cycle Type: Daily, Weekly, or Monthly Cap: Amount in MB. Current Usage: Shown as an amount in MB, as a percentage of the cap, and in a bar graph. Click Add to configure a new Data Usage Rule.
PAGE 115
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Data Usage Rule – page 2 Cycle Type: How often the rule will reset. The data usage amount will be reset at the end of each cycle. Select the length of a cycle from a dropdown menu with the following choices:  Daily  Weekly  Monthly Cycle Start Date: Select the date you wish the rule to begin. This date will be used to track when the rule will reset. Shutdown WAN on Cap: If selected, the WAN device will shut down when the assigned usage is reached.
PAGE 116
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.2.2 Template Configuration Templates allow you to control multiple WAN devices with the same rule. Each WAN device that matches a template will automatically have its own rule created. For example, you can set a template rule for all mobile data modems that causes your router to send an alert after 1000 MB of usage in a month.
PAGE 117
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.2.3 Historical Data Historical Data shows a graph of data usage for each attached WAN source that has an assigned Data Usage Rule. The graph shows the usage trend for one day. Click Add Usage to manually input additional usage for an attached data source. You might do this if you used your modem while not attached to your router and you want to keep an accurate count of your data usage. Enter the date of usage by using the pop-up calendar.
PAGE 118
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.3 GRE Tunnels Generic Routing Encapsulation (GRE) tunnels can be used to create a connection between two private networks. The MBR1400 is enabled for either GRE or VPN tunnels. GRE tunnels are simpler to configure and more flexible for different kinds of packet exchanges, but VPN tunnels are much more secure.
PAGE 119
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Page 1: General Tunnel Name: Choose a name that is meaningful to you. Local Network: This is the local side of the ―Glue Network,‖ a network created by the administrator to form the tunnel. The user creates the IP address inputted here. It must be different from the IP addresses of the networks it is gluing together. Choose any private IP address from the following three ranges that doesn‘t match either network:  10.0.0.0 - 10.255.255.255  172.16.0.
PAGE 120
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Keep Alive: This feature monitors the status of a tunnel. This will more accurately determine if the tunnel is alive or not. Choose the length of time in seconds of the Rate for each check (Default: 10 seconds. Range: 2 – 3600 seconds) and the number of Retry attempts (Default: 3. Range: 1 – 255). Page 2: Routes Adding routes allows you to configure what types of network traffic from the local host or hosts will be allowed through the tunnel.
PAGE 121
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.4 VPN Tunnels VPN (virtual private network) tunnels are used to establish a secure connection to a remote network over a public network. For example, VPN tunnels can be used across the Internet by an individual to connect to an office network while traveling or by two office networks to function as one network. The two networks set up a secure connection across the (normally) unsecure Internet by assigning VPN encryption protocols.
PAGE 122
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.4.1 Page 1: General Tunnel Name: Choose a name meaningful to you. Anonymous: Select to allow remote connections from any IP address. Local Identity: Specifies the identifier sent to the remote host during phase 1 negotiation. If left blank it will default to the IP address of the WAN connection. Currently we only support identifiers in the form of an IP address, a user-fully qualified domain name (user@mydomain.
PAGE 123
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Initiation Mode: ―Always On” or ―On Demand.‖ ―Always On‖ is used if you want the tunnel to initiate the tunnel connection whenever the WAN becomes available. Select On Demand if you want the tunnel to initiate a connection if and only if there is data traffic bound for the remote side of the tunnel. Tunnel Enabled: Enabled or Disabled.
PAGE 124
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.4.3 Page 3: IKE Phase 1 IKE security has two phases, Phase 1 and Phase 2. You have the ability to distinctly configure each phase, but the default settings will be sufficient for most users. To set up a tunnel with a remote site, you need to match your tunnel's IKE negotiation parameters with the remote site. By selecting several encryption, hash, and DH group options, you improve your chances for a successful tunnel negotiation.
PAGE 125
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1    Encryption: Used to encrypt messages sent and received by IPsec. o AES 128 o AES 256 o Blowfish o CAST o DES o 3DES Hash: Used to compare, authenticate, and validate that data across the VPN arrives in its intended form and to derive keys used by IPsec. o MD5 o SHA1 o SHA2 256 o SHA2 384 o SHA2 512 DH Groups: The DH (Diffie-Hellman) Group is a property of IKE and is used to determine the length of prime numbers associated with key generation.
PAGE 126
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.4.4 Page 4: IKE Phase 2 Perfect Forward Secrecy (PFS): Enabling this feature will require IKE to generate a new set of keys in Phase 2 rather than using the same key generated in Phase 1. Additionally, the new keys generated in Phase 2 (with this option enabled) are exchanged in an encrypted session. Enabling this feature affords the policy greater security.
PAGE 127
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.4.5 Page 5: Dead Peer Detection Dead Peer Detection (DPD) defines how the router will detect when one end of the IPsec session loses connection while a policy is in use. Connection Idle Time allows you to configure how long the router will allow an IPsec session to be idle before beginning to send Dead Peer Detection (DPD) packets to the peer machine.
PAGE 128
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.4.6 Page 6: Tunnel Summary The final page of the tunnel configuration interface is a summary of the tunnel specifications. This is especially helpful for matching this information with the router (or similar device) at the other end of the tunnel.
PAGE 129
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.4.7 Global VPN Settings These settings apply to all configured VPN tunnels. Changing the Global VPN Settings is rarely necessary; the default values are almost always sufficient.     IKE / ISAKMP Port: Internet Key Exchange / Internet Security Association and Key Management Protocol port. Default: 500. This is a standard VPN port that usually does not need to be changed.
PAGE 130
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.4.8 VPN with NAT-T If one side of a planned VPN tunnel is behind a NAT (network address translation) firewall, the setup of your tunnel requires the following specifications: 1. Each side of the tunnel must use both a Local Identity and a Remote Identity. These must match the identities on the other side: The Local Identity must match the Remote Identity on the other side of the tunnel, and vice versa.
PAGE 131
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.5 WiFi as WAN / Bridge WiFi as WAN uses another WiFi network as its Internet source and then rebroadcasts its own local network. For example, the MBR1400 can create a private LAN using the public WiFi from a hotel as its WAN. WiFi Bridge functions similarly, but it rebroadcasts the original network. In other words, the router passes on the same settings and addresses already set up by the original NAT.
PAGE 132
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.5.1 WiFi Bridge When in WiFi Bridge mode with a configured profile, a WiFi Bridge device will be added to the local network interfaces, providing a way to bridge two LANs over a WiFi connection. For example, two separate CradlePoint routers linked through WiFi Bridge mode allows you to have one WiFi-connected network in two separated sections of a large office building.
PAGE 133
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.5.2 Saved Profiles This is a list of WiFi networks that have already been configured as WAN sources (or Bridge profiles). The router will attempt to connect to any of these access points using the password you have configured. If more than one access point is in range, then the router will connect with the highest priority network. Network: The name (SSID, or Service Set Identifier) that is broadcast by the access point.
PAGE 134
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Click ―Refresh‖ if a WiFi network to which you want to connect is invisible. Site Survey only operates on the band—2.4 GHz or 5.0 GHz—that is currently configured in the WiFi advanced settings. In order to connect to networks in a different band, first switch the WiFi settings to that band (Network Settings → WiFi / Local Networks in Advanced Mode).
PAGE 135
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 7.5.4 Wireless Scan Settings Scan Interval: How often WiFi as WAN scans the environment for updates. (Default: 60 seconds. Range: 5-3600 seconds.) Scan While Connected: Continue to scan for WiFi as WAN profile updates when connected. Each time a scan occurs the wireless communication of the router will be temporarily interrupted. Normally this should be disabled. © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 136
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 8 SYSTEM SETTINGS The System Settings tab has 6 submenu items that provide access to tools for broad administrative control of the MBR1400:        Administration Device Alerts Hotspot Services Managed Services Serial Redirector System Control System Software © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 137
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 8.1 Administration Select the Administration submenu item in order to control any of the following functions:       8.1.1 Router Security System Clock Local Management Remote Management GPS Syslog Settings Router Security Advanced Security Mode: When the router is configured to use the advanced security mode, several aspects of the router‘s configuration and networking functionality will be extended to support high security environments.
PAGE 138
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 8.1.2 System Clock Enabling NTP will tell the router to get its system time from a remote server on the Internet. If you do not enable NTP then the router time will be based on when the router firmware was built, which is guaranteed to be wrong. Whenever the Internet connection is re-established and once a week thereafter the router will ask the server for the current time so it can correct itself.
PAGE 139
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 8.1.3 Local Management Enable Internet Bounce Pages: Bounce pages show up in your web browser when the router is not connected to the Internet. They inform you that you are not connected and try to explain why. If you disable bounce pages then you will just get the usual browser timeout. In the normal case when the router is connected to the Internet you don't see them at all.
PAGE 140
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 8.1.4 Remote Management Allows a user to enable incoming WAN pings or to change settings for the router from the Internet using the router's Internet address. Allow WAN pings: When enabled the functionality allows an external WAN client to ping the router. Allow Remote Web Administration: When remote administration is enabled it allows access to these administration web pages from the Internet.
PAGE 141
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 8.1.5 GPS If you have an attached device with GPS support, you can enable a graphical view of your router‘s location which will appear in Status → GPS. Users can configure GPS NMEA GGA format sentence reporting, available through a router-based server and/or a remote server. NOTE: Some carriers disable GPS support in otherwise supported modems. If you encounter issues with obtaining a fix, contact your carrier and ensure that GPS is supported.
PAGE 142
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 o Remote server port o Report only over specific time interval: Restricts the NMEA sentence reporting to a remote server to a specific time interval. The following GPS spec is copied from http://aprs.gids.nl/nmea/ 8.1.6 $GPGGA – Global Positioning System Fix Data Name Example Data Description Sentence Identifier $GPGGA Global Positioning System Fix Data Time 170834 17:08:34 Z Latitude 4124.8963, N 41d 24.
PAGE 143
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Checksum *75 Used by program to check for transmission errors Courtesy of Brian McClure, N8PQI. Global Positioning System Fix Data. Time, position, and fix related data for a GPS receiver. eg2. $--GGA,hhmmss.ss,llll.ll,a,yyyyy.yy,a,x,xx,x.x,x.x,M,x.x,M,x.x,xxxx hhmmss.ss = UTC of position llll.ll = latitude of position a = N or S yyyyy.yy = Longitude of position a = E or W x = GPS Quality indicator (0=no fix, 1=GPS fix, 2=Dif.
PAGE 144
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 6 7 8 9 10 11 12 13 14 15 = GPS quality indicator (0=invalid; 1=GPS fix; 2=Diff. GPS fix) = Number of satellites in use [not those in view] = Horizontal dilution of position = Antenna altitude above/below mean sea level (geoid) = Meters (Antenna height unit) = Geoidal separation (Diff. between WGS-84 earth ellipsoid and mean sea level. -=geoid is below WGS-84 ellipsoid) = Meters (Units of geoidal separation) = Age in seconds since last update from diff.
PAGE 145
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 8.2 Device Alerts The Device Alerts submenu choice allows you to receive email notifications of specific system events. YOU MUST ENABLE AN SMTP EMAIL SERVER TO RECEIVE ALERTS. Alerts can be included for the following:      Firmware Upgrade Available: A firmware update is available for this device. WAN Device Status Change: An attached WAN device has changed status. The possible statuses are plugged, unplugged, connected, and disconnected.
PAGE 146
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1        Server Address: smtp.gmail.com Server Port: 587 (for TLS, or Transport Layer Security port; the MBR1400 does not support SSL). Authentication Required: For Gmail, mark this checkbox. User Name: Your full email address Password: Your Gmail password From Address: Your email address To Address: Your email address Once you have filled in the information for the SMTP server, click on the ―Verify SMTP Settings‖ button.
PAGE 147
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 8.3 Hotspot Services Any of your networks can be enabled as a hotspot. To enable a hotspot, you need to select a network and set it as a hotspot in Network Settings → WiFi / Local Networks. NOTE: Although any network can be a hotspot, the MBR1400 allows only one hotspot. Enable Hotspot Services: Disabled by default. Click Enabled to activate Hotspot options.
PAGE 148
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 8.3.1 Simple Mode Settings Display: This section allows you to choose if a "Terms of Use" page will be given to the user connecting to the hotspot.    Internal Terms of Use. Fill in your own terms of use. External Terms of Use. Specify a URL that has the Terms of Use page. Users will automatically be directed to this page. No Terms of Use. Redirect Only.
PAGE 149
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 8.3.2 RADIUS/UAM Settings This section allows you to configure a RADIUS and Universal Access Method server. After the user accepts the terms, you can either let him/her continue to the URL they were trying to reach or you can force the user to go to a specified UAM Server or URL once before continuing on. RADIUS settings:         Server Address 1: Assigned by RADIUS service. Server Address 2: This is an optional backup server.
PAGE 150
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 UAM Settings:    8.3.3 Login URL: Assigned by UAM service. Shared Secret: Optional, depending on the UAM service. NAS/Gateway ID: Assigned by UAM service. Allowed Hosts Prior to Authentication Adding host names to this list will allow access from your network to any external domain or website prior to being authenticated. For example, a hotel might allow access to its own website prior to authentication.
PAGE 151
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 8.4 Managed Services ASK YOUR CRADLEPOINT SALES REPRESENTATIVE FOR DETAILS Managed Services allow you to centralize your router configuration using the WiPipe Central server. WiPipe Central services must be purchased separately. Enable Services: Enables the WiPipe Central client to contact the server. Ethernet Communication Only: Select this to ensure that the WiPipe Central client will not start unless the WAN is Ethernet.
PAGE 152
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 LAN port #: Use the LAN port # field to configure the LAN port number you wish to access SNMP services on. (Default: 161) Enable SNMP on WAN: Enabling SNMP on WAN will make SNMP services available to the WAN interfaces of the router. WAN port #: Use the WAN port # field to configure which publicly accessible port you wish to make SNMP services available on. (Default: 161) SNMPv1: SNMP version 1 is the most basic version of SNMP.
PAGE 153
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1     MD5 with DES encryption SHA with DES encryption MD5 with AES encryption SHA with AES encryption Username: Enter the Username configured on your SNMP host in the username field. Password: Enter the Password for your SNMP host in the password and verify password fields. This password must be at least 8 characters long. Enable SNMP traps: Enabling traps will allow you to configure a destination server, community, and port for trap notifications.
PAGE 154
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 8.5 Serial Redirector Attach a USB serial device to establish a serial link to a host port on the router. The serial console support allows a USB-to-serial connection to another router or similar device. Through a telnet session over the RS232 interface, you can monitor health, pass data, or configure the attached device. Enabled: Select to reveal serial configuration options. LAN: Enable serial redirector for LAN connections.
PAGE 155
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1        600 1200 1800 2400 4800 9600 19200 Byte Size: The number of bits in a byte. Select from: 5, 6, 7, and 8. Parity: Change this value to enable parity bit checking. Select from the following dropdown options:      None: No parity checking. (Default) Even: parity bit will always be even. Odd: parity bit will always be odd. Mark: parity bit will always be odd and always 1. Space: parity bit will always be even and always 0.
PAGE 156
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 8.6 System Control Restore to Factory Defaults: This changes all settings back to their default values. Reboot The Device: This causes the router to restart. Advanced: System Automatic Reboot and Ping Test Scheduled Reboot: This causes the router to restart at a user-determined time. Watchdog Reboot: This causes the router to automatically restart when it determines unrecoverable error condition has occurred.
PAGE 157
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 8.7 System Software Firmware Upgrade allows the administrator to load new firmware onto the router to add new features or fix defects. If you are happy with the operation of the router, you may not want to upgrade just because a new version is available. Check the firmware release notes for information to decide if you should upgrade or not. Current Firmware Version: Shows the number of the current firmware and the date it was updated.
PAGE 158
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 9 GLOSSARY 802.11 Alphanumeric A family of specifications for wireless local area networks (WLANs) developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). Characters A-Z and 0-9. Access Control List ACL. This is a database of network devices that are allowed to access resources on the network. Access Point AP. Device that allows wireless clients to connect to it and access the network.
PAGE 159
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Authentication Bit rate To provide credentials, like a Password, in order to verify that the person or device is really who they are claiming to be. The amount of bits that pass in given amount of time. Automatic Private IP Addressing APIPA. An IP address that a Windows computer will assign itself when it is configured to obtain an IP address automatically but no DHCP server is available on the network.
PAGE 160
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 CardBus Data-Link layer A newer version of the PC Card or PCMCIA interface. It supports a 32- bit data path, DMA, and consumes less voltage. The second layer of the OSI model. Controls the movement of data on the physical link of a network. CAT 5 Category 5. Used for 10/100 Mbps or 1Gbps Ethernet connections. Organizes information so that it can be managed updated, as well as easily accessed by users or applications.
PAGE 161
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Demilitarized zone Download DMZ: A single computer or group of computers that can be accessed by both users on the Internet as well as users on the Local Network, but that is not protected by the same security as the Local Network. To send a request from one computer to another and have the file transmitted back to the requesting computer.
PAGE 162
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Encryption Fragmentation Converting data into cyphertext so that it cannot be easily read. Breaking up data into smaller pieces to make it easier to store. Ethernet FTP The most widely used technology for Local Area Networks. File Transfer Protocol. Easiest way to transfer files between computers on the Internet. Fiber optic Full-duplex A way of sending data through light impulses over glass or plastic wire or fiber.
PAGE 163
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Half-duplex IEEE Data cannot be transmitted and received at the same time. Institute of Electrical and Electronics Engineers. Hashing Transforming a string of characters into a shorter string with a predefined length. Internet Group Management Protocol is used to make sure that computers can report their multicast group membership to adjacent routers. Hexadecimal IIS Characters 0-9 and A-F.
PAGE 164
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Internet Protocol Security Java IPsec provides security at the packet processing layer of network communication. A programming language used to create programs and applets for web pages. Internet Service Provider Kbps An ISP provides access to the Internet to individuals or companies. Kilobits per second. Intranet Kilobyte. A private network. L2TP Intrusion Detection Layer 2 Tunneling Protocol.
PAGE 165
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 LPR/LPD MPPE ―Line Printer Requestor‖/‖Line Printer Daemon‖. A TCP/IP protocol for transmitting streams of printer data. Microsoft Point-to-Point Encryption is used to secure data transmissions over PPTP connections. MAC Address MTU A unique hardware ID assigned to every Ethernet adapter by the manufacturer. Mbps Maximum Transmission Unit is the largest packet that can be transmitted on a packet-based network like the Internet.
PAGE 166
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Network Interface Card NIC. A card installed in a computer or built onto the motherboard that allows the computer to connect to a network. Network Layer The third layer of the OSI model which handles the routing of traffic on a network. Network Time Protocol Used to synchronize the time of all the computers in a network. NIC routers in the network as opposed to sending the entire routing table at a regular interval, which is how RIP functions.
PAGE 167
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 channel) but can have multiple ports (logical channels) each identified by a number. PPP Point-to-Point Protocol is used for two computers to communicate with each over a serial interface, like a phone line. PPPoE Point-to-Point Protocol over Ethernet is used to connect multiple computers to a remote server over Ethernet. PPTP Point-to-Point Tunneling Protocol is used for creating VPN tunnels over the Internet between two networks.
PAGE 168
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Session key SSH An encryption and decryption key that is generated for every communication session between two computers. Secure Shell is a command line interface that allows for secure connections to remote computers. Session layer SSID The fifth layer of the OSI model which coordinates the connection and communication between applications on both ends. Service Set Identifier is a name for a wireless network.
PAGE 169
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 TFTP Upload Trivial File Transfer Protocol is a utility used for transferring files that is simpler to use than FTP but with less features. To send a request from one computer to another and have a file transmitted from the requesting computer to the other. Throughput UPnP The amount of data that can be transferred in a given time period. Universal Plug and Play.
PAGE 170
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Wake on LAN WiFi Protected Access Allows you to power up a computer through it‘s Network Interface Card. An updated version of security for wireless networks that provides authentication as well as encryption. WAN Wide Area Network Wide Area Network. The larger network that your LAN is connected to, which may be the Internet itself, or a regional or corporate network. WCN Windows Connect Now.
PAGE 171
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 Yagi antenna A directional antenna used to concentrate wireless signals on a specific location. © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 172
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 10 APPENDIX 10.1 Regulatory Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 173
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 10.3 Specifications MODEL NAME MBR1400 Mission-Critical Broadband Router WAN / INTERNET 3G/4G via five modem ports (3 USB 2.0, 2 ExpressCard); one default Ethernet port (10/100/1000); additional LAN Ethernet ports re-configurable to WAN for redundancy LAN WiFi 802.11 a/b/g/n, four default Ethernet ports (10/100/1000); one additional WAN Ethernet port reconfigurable to LAN use ANTENNAS 3 external 2.
PAGE 174
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1   Keying - automatic using IKE 1.0 or manual Authentication Method: Pre-Shared Key © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.
PAGE 175
CRADLEPOINT MBR1400| USER MANUAL Firmware ver. 3.4.1 http://www.cradlepoint.com/ Copyright © 2012 by CradlePoint, Inc. All rights reserved. © 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.