User manual

CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 4.2
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 41
Local Networks: “Detailed Info” links to Network Settings → WiFi / Local Networks.
• Clients: The number of current clients
For each network, the following information is displayed:
• Network Name: IP Address/Netmask
o Route Mode: NAT (Network Address Translation), Standard (NAT-less), Hotspot, or Disabled
o Access: Admin Access, LAN Isolation, UPnP (Universal Plug and Play), and/or DHCP
To configure a network, see Network Settings → WiFi / Local Networks.
WiFi Networks: “Detailed Info” links to Network Settings → WiFi / Local Networks.
• WiFi Radio: Channel: 1-11 for 2.4 GHz; 36, 40, 44, 48, 149, 153, 157, 161, or 165 for 5 GHz; Transmit Power
(expressed as a percentage)
For each WiFi network, the following information is displayed:
• SSID: Service Set Identifier, an identifier for a wireless network
o Security: WPA2/WPA1/WEP Personal/Enterprise or Open; Isolated Clients
o Network: The name of the local network
To configure WiFi network settings see Network Settings → WiFi / Local Networks.
5.2.1 Router Alerts
On the right side of the Dashboard page is a brief set of “Router Alerts” that state basic
information such as whether the router is running properly. This will inform you about the
availability of new firmware, for example.
Router Alerts includes links to the System Software page (for new firmware) and the
Connection Manager.