User manual

CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 4.2

3.2.3 Connect to the Internet

If you used the First Time Setup Wizard, you might have

changed the “WiFi Network Name” or the “Security Mode”

password. If so, you will need to reconnect to the MBR1400

network.

• Find the network. Look for your new personalized

network name (or the default SSID of the form

“MBR1400-xxx”).

• Log in using your new personalized WiFi security

password (or the Default Password found on the product

label on the bottom of the router).

Your network should now be up and running, and users who

have the security password can access the network on WiFi-enabled devices.