User manual

CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 4.2

Download Priority: The priority value has two different effects on traffic. Higher priority traffic is handled before lower

priority traffic, which can lead to shorter response times. Also, when spare bandwidth is available it is offered to higher

priority queues first. Move the slider to select from the following options (Default: Normal):

• Lowest

• Lower

• Below Normal

• Normal

• Above Normal

• High

• Higher

• Highest

DSCP (DiffServ) Tag: Differentiated Services Code Point

(DSCP) is the successor to TOS (Type of Service). Use

this field to 'tag' the traffic by putting the value in the DSCP

header of each IP packet that flows through this queue.

Use the value of '0' to clear the existing DSCP value in the

packet header.

DSCP Tagging is sometimes used so that other networking

equipment, upstream or post-NAT, can do traffic shaping

based on the DSCP Tags as opposed to IP addresses or

ports.

This setting is optional. For more information see the Differentiated services Wikipedia page.

Click Finish to save this queue.