User manual
CRADLEPOINT MBR1400 | USER MANUAL – Firmware version 4.2
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 101
STP: (requires hardware version 2.0)
Spanning Tree Protocol (STP) allows a network design to include redundant paths while preventing broadcast radiation
from bridge loops.
Enable STP: Enable Spanning Tree Protocol loop detection.
Bridge Priority: Set the priority of the bridge. When determining the root bridge of the spanning tree topology, the bridge
priority is compared first. The bridge with the lowest priority value will win. If you want this router to be the root bridge,
then set it to a value less than the default of 32768. A valid priority value is between 0 and 65535.