Operating instructions

7
Getting Started (continued)
4. Connect to a Computer or other Network Equipment.
In order to access the MBR1400, establish a connection to the router. Connect wirelessly to the WiFi broadcast, or with an
Ethernet cable connected to your computer and then plugged into one of the orange Ethernet ports.
The default WiFi network name broadcast is “MBR1400-xxx”, where “xxx” is the last three characters of your router’s MAC address
(this is the “SSID” on the product label).
To connect to the WiFi, input the default password when prompted. The
default password is provided on the product label found on the bottom of
your router (see example below).
5. Use.
For most users, the MBR1400 router can be used immediately without any
special configuration changes. If you would like to change your network
name, level of WiFi security, etc. follow the First Time Setup Wizard steps on
page 9.
CradlePoint MBR1400 (Slickrock) PRODUCT LABEL
Made in Taiwan
RoHS
Part No.: MBR1400
www.cradlepoint.com
H/W ver.: 2.0
12V 1.5A
MAC Address: 0030440c1fc1
Serial No.: MM100167900418
FCC ID:UXX-MBR1400v2
IC: 6921A-MBR1400v2
Model No.: MBR1400v2
Default Password: 440c1fc1
SSID: MBR1400-fc1