User manual

CRADLEPOINT COR | USER MANUAL Firmware ver. 4.2.0

7.1.5 Modem Settings

Not all modems will have all available options; the available options are specific to the modem type.

On Demand: Typically modem connections are not always on. When this mode is selected a connection to the Internet is

made as needed. When this mode is not selected a connection to the Internet is always maintained.

Aggressive Reset: When Aggressive Reset is

enabled the system will attempt to maintain a good

modem connection. If the Internet has been

unreachable for a period of time a reset of the

modem will occur in attempt to re-establish the

connection.

Network-Initiated Alerts: This field controls

whether the Sprint network can disconnect the

modem to apply updates, such as for PRL, modem

firmware, or configuration events. These activities

do not change any router settings, but the modem

connection may be unavailable for periods of time

while these updates occur. The modem may also

require a reset after a modem firmware update is

complete.

• Disabled: The request to update will be

refused.

• When Disconnected: The request to update

will only be performed when the modem is

either in a disconnected state or dormant

state. If the modem is not in one of these states when the request is received, then the router will remember the

request and perform the update when the modem becomes disconnected/dormant.

• On Schedule: The request to update will only be performed at the specified scheduled time, no matter what the

state of the modem is.