Specifications

HAVE A QUESTION? CALL HART CLIENT CARE at 800-252-2818, or EMAIL US AT [e-mail]
Page 5
PLACING THE HART STICKERS PLACING THE HART STICKERS
-
- Con’tCon’t
HART TRAINING STICKERS
 Exhibit B in this guide contains one “sheet” of Training Stickers. These stickers are
only to be used for Training - never use these for Live inventory.
 The system can identify these stickers as Training Stickers and it will not include the
inventory data scanned on them in your final results.
 You can identify Training Stickers in two ways.
 First, they are PINK in color (you will never receive pink stickers for Live inventory);
 Second, the series number is always 3347.
When stickering your store:
 The stickers MUST be in place on your fixtures BEFORE scanning begins.
 Utilize no more than TWO (2) persons to place the stickers - the Inventory Lead who
will record the sticker numbers on to the Floor Map or Fixture Log, and another key
employee to place the stickers on the fixtures.
 DO NOT SKIP OR SEPARATE THE STICKER SHEETS.
 Every sticker must be accounted for. Separating the sticker sheets will create large
gaps of “missing” stickers.
 Start with the very first sticker on the first sheet and work your way down the first
column.
 Continue on to the top of the second column, working your way down then on to the
third column of stickers.
 Once a sheet of stickers have been used, continue on to the very next sheet.
 Save the used sticker sheets. The 4-digit sticker number and 9-digit control number
appear on the sheets. This will aid you when keying your sticker ranges.
 Never destroy or throw away any stickers. Every sticker must be accounted for. If a
sticker becomes torn, use scotch tape to repair the sticker. If the bar code on the sticker
is unscannable, the sticker number can be key-entered.