Specifications

HAVE A QUESTION? CALL HART CLIENT CARE at 800-252-2818, or EMAIL US AT [e-mail]
END EMPLOYEE SCANNING SESSIONEND EMPLOYEE SCANNING SESSION
When an Employee has completed their
scanning assignments, they should log out
and return the scanner to the Control Desk.
At the Scan Hart Sticker screen press the
Logout button on the TouchScreen to log out,
and the scanner will return to the Enter
Employee ID screen.
NOTE:
If there are stickers in the scanner that
have not yet been transmitted (for example,
Employee is logging out while out of range
of the access point) the scanner must be
brought back into range before the
Employee can log out.
CLOSE OUT SCANNERCLOSE OUT SCANNER
If a scanner is not needed again for this
inventory, the scanner must be closed out.
1. From the Enter Employee ID screen, press
the Close Scanner button on the
TouchScreen to close the scanner.
2. Follow the scanner instructions. The
scanner will return to the Scan Hart ID
screen.
Page 23
INVENTORY PROCEDURES INVENTORY PROCEDURES
-
- Con’tCon’t