Specifications

HAVE A QUESTION? CALL HART CLIENT CARE at 800-252-2818, or EMAIL US AT [e-mail]
SET UP SCANNERSSET UP SCANNERS
Page 13
 Now that the access points are up and running, you can
start registering the scanners.
Set Up Scanners:
1. Scan the Hart Control ID bar code.
2. Key your Store Number and press ENT (Enter).
3. Click Yes to continue; the scanners will register shortly
after pressing Yes.
4. The “ENTER EMPLOYEE ID” screen will be displayed -
Registration is complete.
5. Repeat steps 1 and 2 for all scanners.
6. Verify the Scanners have Registered Successfully:
 After pressing “Continue”, the “P” should disappear
from the bottom of the screen.
 If the “P” still appears, it could mean your Access
Point is not connected, or the Scanners are out of
range of the access point.