Installation manual

Product Introduction
This document describes the CradlePoint IBR650E Setup Instructions for Verizon Wireless DSP Deployments.
Prior to Installation
Verify all the required components from the lists above are on hand prior to starting the installation process.
If you are missing parts contact Cellular Specialties, Inc. 670 N. Commercial St. Manchester NH 03101, Tel:
603-626-6677, Toll Free (USA): 877-844-4274, Fax: [phone] as soon as possible.
CSI CDMA External Modem Kit for Use With Digital Repeater Installations
Warning: CSI digital repeaters, with software version 2.3.1 or higher are designed to support
the integration of the CSI CDMA External Modem Kits. Check your repeater’s Status Page for software
version and contact CSI if you need an update. See Repeater Login Section for information on how to get to
the System Status Page to verify your software version.
Adding one of the CDMA external modem kits to a CSI digital repeater installation is simple and straight
forward. The kits contain the following items:
DSPMOD-CP-S/CDMA
1. (1) 375-1014-001 - Modem
2. (1) 375-1013-001 - 5 port Ethernet Switch
3. (1) 960-1047-003 - CSI Installation Manual
4. (1) CS54-3506-47 - N Type Male to N Type Male 1’ RF jumper
5. (1) 820-2028-001 - 3’ N Male to SMA Male Jumper
6. (1) CS05-102-429 - 10dB Directional Coupler
7. (1) 820-2122-014 - 14’ Ethernet Cable
8. (2) 820-2122-001 - 7’ Ethernet Cable
DSPMOD-CP/CDMA
1. (1) 375-1014-001 - Modem
2. (1) 960-1047-003 - CSI Installation Manual
3. (1) CS54-3506-47 - N Type Male to N Type Male 1’ RF jumper
4. (1) 820-2028-001 - 3’ N Male to SMA Male Jumper
5. (1) CS05-102-429 - 10dB Directional Coupler
6. (1) 820-2122-014 - 14’ Ethernet Cable
-5-