Installation manual

-24-
Index
A
Activating the CradlePoint IBR650E on the Verizon
Wireless Network 13
Additional Features 17
Additional LED Indications 7
Additional Tips 21
Application 4
Attaching the IBR650 to the Mounting Bracket 9
ATTN LED 7
B
Basic Setup 10
C
Confi guring your modem for port forwarding 15
D
Document Purpose 4
Dual LAN 18
E
Ethernet LED 6
Ethernet Ports 6
F
Functionality Test 21
G
Getting the modem ready for OTASP 12
H
Hardware Overview 6
I
Intended Users 4
L
LAN Settings 16
M
Micro USB 6
Modem Activation 12
Modem Antennas 7
Modem LED 7
Mounting Bracket 8
P
Port Forwarding 15
Ports, LED’s and Switches 6
Power 6
Power LED 7
Power On/Off 7
Product Introduction 5
Product Registration Information 4
R
Removing the IBR650 from the Mounting Bracket 10
Reset 6
S
Safety Guidelines 4
Step 4: Connecting the modem to the repeater 18
W
Warranty 25
Nothing else will need to be chosen or entered. Click “OK”, then “OK” again and retry connection.
A crossover Ethernet cable (supplied) must be used for Web Interface access. As a reminder, you must verify
the Ethernet port on your laptop is powered. If your laptop is on battery power, the Ethernet port may be
inactive by default. If this is the case simply plug in the laptop to a 110vac source or change the power set-
tings to enable the Ethernet port when the laptop is using battery power.