User's Manual

8
Navigating the Help and Setup Pages
Select the Main Topic tab
you wish to use.
Use the side navigation menu to
access subtopics.
Be sure to save your settings
before leaving each page.
You can abandon all your changes at
anytime by selecting “Don’t Save Settings.”
What you’ll find in these pages
BASIC Topics
Wizard
These wizards are designed to assist you in
configuring your wireless network once you have
completed the steps found in the Getting On The
Internet section of this manual. Use the wizards
to name your network, set your new password,
and set the security levels for your new CTR.
Internet Connection Setup Wizard
Internet Security Setup Wizard
WAN
This page is used to set your Internet connection
type. For most users, the default settings are
appropriate for everyday usage.
Specify DNS Servers
Advanced DNS settings
MTU Settings
Link Drop Delay
WAN Port Speed
Ping Response Settings
MAC Cloning Settings
LAN
Use this page to configure the internal network
settings of your CTR router. The IP Address that is
configured here is the IP Address that you use to
access the Web-based management interface. If
you change the IP Address here, you may need to
adjust your PC’s network settings to access the
network again. The default settings are
appropriate for most everyday users.
Set IP Address
Set Subnet Mask
RIP Settings
Set Router Metric
Default Router set
Enable/Disable IGMP
Enable/Disable DNS Relay
DHCP
This page is used to configure the built in DHCP
Server to assign IP Addresses to the computers
on your network.
Enable/Disable DHCP Server
Specify DHCP IP Address Range
Specify Lease Time
Enable DHCP Broadcast
View DHCP Clients
Add DHCP Reservation
View Reservations List
Wireless
This page is used to configure your basic wireless
settings for your CTR. From here you can set the
visibility of your network to others, your wireless
Enable/Disable Wireless Radio
Set SSID
Set Network Visibility
Auto/Manual Channel Select