User manual

CRADLEPOINT COR | USER MANUAL Firmware ver. 5.0.0

8.1.3 Local Management

Enable Internet Bounce Pages: Bounce pages

show up in your web browser when the router is

not connected to the Internet. They inform you that

you are not connected and try to explain why. If

you disable bounce pages then you will just get the

usual browser timeout. In the normal case when

the router is connected to the Internet you don't

see them at all.

Local Domain: The local domain is used as the

suffix for DNS entries of local hosts. This is tied to

the hostnames of DHCP clients as

DHCP_HOSTNAME.LOCAL_DOMAIN.

System Identifier: This is a customizable identity that will be used in router reporting and alerting. The default value is the

MAC address of the router.

Require HTTPS Connection: Check this box if you want to encrypt all router administration communication.

Secure HTTPS Port: Enter the port number you want to use. The default is 443.

Enable SSH Server: When the router's SSH server is enabled you may access the router's command line interface (CLI)

using the standards-based SSH protocol. Use the username "admin" and the standard system password to log in.

SSH Server Port: Default: 22.