User manual

CRADLEPOINT COR | USER MANUAL Firmware ver. 5.0.0

7.7 Network Mobility (NEMO)

NOTE: NEMO requires a feature license. Go to System Settings → Feature Licenses to enable this feature. Without a valid license, settings can

be configured, but will not be implemented.

Network Mobility (NEMO) is an Internet standards track protocol defined in RFC 5177. The protocol allows session

continuity for every node in a mobile network as the network moves.

NEMO requires a service provider, e.g. Verizon Wireless

Private Network with DMNR (Dynamic Mobile Network

Routing). Your NEMO service provider will define many

of the settings for your NEMO configuration.

Once you have a NEMO service provider and a valid

feature license, add networks to the Networks Routed

by NEMO section by first clicking Add. In the popup

window, input:

• Network Address

• Netmask

The Network Address and Netmask, or subnet mask,

together define a range of IP addresses that comprise

the local network you want associated with the NEMO

settings.

7.7.1 Network Mobility (NEMO) Settings

Home IP Address and Home Netmask – These may be

provided by your NEMO service provider. The IP address

is a placeholder, “dummy” address; any IP address can

be used (1.2.3.4 is common).

Home Agent IP Address, Home Agent Password, and

Home Agent SPI – Your home agent will be defined by

your NEMO service provider.