User manual

CRADLEPOINT COR | USER MANUAL Firmware ver. 5.0.0

Multicast Proxy:

IGMP (Internet Group Management Protocol) multicast proxy

allows a single packet to reroute to multiple destinations (see the

Wikipedia explanation of multicast). This may be used for IPTV,

for example.

Multicast Proxy: Select to enable IGMP proxy support to allow

multicast streams to flow across this network.

Quick Leave Mode: Disable quick leave mode if it's vital that the

daemon should act exactly as a real multicast client on the

upstream interface. However, disabling this function increases the

risk of bandwidth saturation.

By default, enabling multicast proxy enables a multicast

connection with devices within the LAN. In rare cases, additional

IP address ranges need access to the multicast streams. Click

Add and input the IP Address and Netmask for an additional IP

address range.