User manual

CRADLEPOINT IBR600 | USER MANUAL Firmware ver. 3.6.1

For each network, the following information is displayed:

 Network Name: IP Address/Netmask

o Route Mode: NAT (Network Address Translation), Standard (NAT-less), Hotspot, or Disabled.

o Access: Admin Access, LAN Isolation, UPnP (Universal Plug and Play), and/or DHCP.

To configure a network, see Network Settings → WiFi / Local Networks.

WiFi Networks: “Detailed Info‖ links to Network Settings → WiFi / Local Networks.

 WiFi Radio: Channel: 1-11. Transmit Power (Expressed as a percentage).

For each WiFi network, the following information is displayed:

 SSID: Service Set Identifier—an identifier or name for a wireless network.

o Security: WPA2/WPA1/WEP Personal/Enterprise or Open; Isolated Clients

o Network: The name of the local network.

To configure WiFi network settings see Network Settings → WiFi / Local Networks.

5.2.1 Router Alerts

On the right side of the Dashboard page is a brief set of ―Router Alerts‖ that state basic

information such as whether the router is running properly. This will inform you about the

availability of new firmware, for example.

Router Alerts includes links to the System Software page (for new firmware) and the

Connection Manager.