User manual

CRADLEPOINT IBR600 | USER MANUAL Firmware ver. 3.6.1

System Settings – Provides broad administrative controls. For example, you can set up a Terms of Use page for your

guest network (Hotspot Services), enable remote management of the router (Administration), or upgrade firmware

(System Software).

4.4.1 Network Settings vs. Internet

When using the Web interface, it will be important to pay attention to the difference between the Internet source for your

IBR600 and the network created by the IBR600. The “Internet” tab broadly refers to the router‘s source of Internet, while

the “Network Settings” tab broadly refers to the network created by the router.

The following chart highlights this difference:

Internet tab

Internet ―input‖

Source for IBR600

WAN (Wide Area Network)

Network Settings tab

Internet ―output‖

Network created by IBR600

LAN (Local Area Network)

Examples:

 If you want to change the content filtering settings for the network created by the IBR600, go to the Network

Settings tab.

 If you have multiple Internet sources (such as the embedded modem and an Ethernet connection) for which you

would like to set priority levels, go to the Internet tab.