User manual

CRADLEPOINT CBA750B | USER MANUAL Firmware version 4.2

WAN Configuration Rule

This section allows you to create simple or complex rules

that affect how individual Internet sources or classes of

sources (perhaps all WiMAX modems or all modems from

Sierra Wireless) behave in the router.

After clicking “Add” or “Edit,” you will see a popup with the

following tabs:

• Filter Criteria

• General Settings

• Modem Settings

• WiMAX Settings

• CDMA Settings

• SIM/APN Settings

• IP Settings

Filter Criteria. Begin by setting the Filter Criteria if you

are creating a new rule. Create a name for your rule and the condition for which the rule applies:

Rule Name: Create a name meaningful to you. This name is optional.

Select each of the following to create a condition for your rule. When:

• Port (USB Port 1, 2; ExpressPort): Select by the port that you are plugging the modem into.

• Manufacturer: Select by the manufacturer, such as Sierra Wireless.

• Model: Set your rule according to the specific model of modem.

• Type (LTE, Modem, WiMAX, HSPA): Select by type of Internet source.

• Serial Number: Select 3G or LTE modem by Serial Number.

• MAC Address: Select WiMAX modem by MAC Address.

• Unique ID: Select by ID. This is generated by the router and displayed when the device is connected to the

router.

Condition: Select “is,” “is not,” “starts with,” “contains,” or “ends with” to create your condition’s statement.