User manual

CRADLEPOINT CBA750B | USER MANUAL Firmware version 4.2
© 2013 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 84
7.1.3 General Settings
• Enabled: Select/deselect to enable/disable.
• Force NAT: Normally the LAN Route Mode
controls the use of NAT (network address
translation). When this option is selected the
router will always perform NAT when traffic is
sent out from this device.
• Priority: This number controls failover and
failback order. The lower the number, the
higher the priority and the more use the
device will get. This number will change when
you move devices around with the priority
arrows in the WAN Interfaces list.
• Load Balance: Select to allow this device to
be available for the Load Balance pool.
• Download bandwidth: Defines the default
download bandwidth for use in Load Balance
algorithms. (Range: 128 Kb/s to 76800 Kb/s.)
• MTU: Maximum transmission unit. This is the
size of the largest protocol data unit that the
device can pass. (Range: 46 to 1500 Bytes.)