User manual

CRADLEPOINT CBA750B| USER MANUAL Firmware version 4.2

6) Configuring Your Access Point Name (APN):

If you are using a SIM-based modem (LTE/GSM/HSPA) with your CradlePoint router, you may need to configure the

APN before it will properly connect to your carrier. Wireless carriers offer several APNs, so check with your carrier to

confirm the appropriate one to use. Some examples include:

• AT&T: "broadband"

• T-Mobile: "epc.tmobile.com"

• Rogers LTE: "lteinternet.apn"

• Bell: "inet.bell.ca"

• TELUS: "isp.telus.com"

You can either leave this on the Default setting or

select Manual and input a specific APN.

DON'T USE THIS APN WIZARD if you have already

configured an APN. Any specific modem settings will

not be overwritten by this generic APN setup. Leave

this setting as Default, and after finishing this Wizard

go to Internet ! Connection Manager, select your

modem, and edit the settings. The SIM PIN/APN tab

has more available settings than are provided here.

Also, if your specific modem or SIM already has

APNs programmed into it, it is easier to select these

from the Internet ! Connection Manager page.

Leave this on the Default setting.