User manual

CRADLEPOINT CBA750B | USER MANUAL Firmware version 4.2

8.1.3 Local Management

Enable Internet Bounce Pages: Bounce pages show up in your web browser when the router is not connected to the

Internet. They inform you that you are not connected and try to explain why. If you disable bounce pages then you will just

get the usual browser timeout. In the normal case when the router is connected to the Internet you don't see them at all.

Disable Signal Strength Button: This disables the Signal Strength button on the physical router.

Disable IP Passthrough/Configuration mode switch: This disables the ROUTER/PASSTHROUGH SWITCH on the

physical router. Click this to ensure that IP passthrough or router settings created through the administration pages (or

WiPipe Central, CLI, etc.) will not be overridden if someone flips the physical switch on the router.