User manual

ADTRAN Routers with CradlePoint CBA750B Configuring the ADTRAN Router

Configuring the ADTRAN Router

This section describes the required CLI configuration for ADTRAN routers when using the CradlePoint

CBA750B for wireless WAN failover. It also includes optional instructions for configuring the Network

Monitor feature for failover.

This section provides example configurations that may need to be altered to fit your specific

network. For additional configuration information please refer to the guides listed in

Additional Resources on page 24.

This section consists of the following subsections:

• Configuring the ADTRAN Router for Wireless WAN Failover on page 5

• Optional. Configuring WAN Failover with Network Monitor on page 9

Configuring the ADTRAN Router for Wireless WAN Failover

The following configuration steps are required for all wireless WAN failover deployments:

• Step 1: Access the CLI on page 5

• Step 2: Configure Policy-Based Routing for Accessing the CradlePoint CBA750B on page 6

• Step 3: Configure the LAN Interface on page 6

• Step 4: Configure Policy Classes and Access Lists for Each WAN Connection on page 7

• Step 5: Configure Fast NAT Failover on page 8

• Step 6: Configure the WAN Failover Interface to the CradlePoint CBA750B on page 8

• Step 7: Configure the Primary Ethernet WAN Interface on page 9

• Step 8: Configure the Default Route to the WAN Gateway on page 9

Step 1:

Access the CLI

To access the command line interface (CLI) on the ADTRAN router, follow these steps:

1. Boot up the unit.

Telnet to the unit (telnet <ip address>), for example:

telnet 10.10.10.1

3. Enter your user name and password at the prompt.

If during the unit’s setup process you have changed the default Internet Protocol (IP)

address (10.10.10.1), use the configured IP address.

The AOS default user name is admin and the default password is password. If your

product no longer has the default user name and password, contact your system

administrator for the appropriate user name and password.