User manual

CRADLEPOINT CBA750B | USER MANUAL Firmware version 5.0

• Unique ID: Select by ID. This is generated by the router and displayed when the device is connected to the

router.

Condition: Select “is,” “is not,” “starts with,” “contains,” or “ends with” to create your condition’s statement.

Value: If the correct values are available, select from the dropdown list. You may need to manually input the value.

The condition will be of the following form:

“ (When) is/is not (value) ”

For example:

“Type is not WiMAX”

“Port is USB Port 1”

Once you have established the condition for your configuration rule, choose from the other tabs to set the desired

configuration. All of the tab options – General Settings, IP Overrides, IPv6 Settings, Ethernet Settings, Modem

Settings, WiMAX Settings, CDMA Settings, and SIM/APN/Auth Settings – have the same configuration options shown

above in the WAN Configuration section (the options for Configuration Rules are the same as they are for individual

devices).