Setup guide

10
LED Information
DATA ACTIVITY Green Blinking = Indicates data is actively being transferred. No Light = No data is being
transferred.
FAILOVER MODE Green = Primary modem connection was lost so the secondary modem is active.
No Light = Primary data source is operating normally.
HIGH SPEED Green = Modem is operating in high-speed data mode.
No Light = Modem is operating in 1xRTT or other low-speed mode such as EDGE.
POWER OVER ETHERNET Green = Unit is operating from PoE. No Light = Unit is operating from 12V DC Input
(AC or Car Adapter).
CONFIGURATION / PASS-THROUGH MODES
Green = Unit is operating in router/configuration mode.
No Light = Unit is operating in bridge/pass-through mode.
router/configuration mode
bridge/pass-through mode
ATTENTION Green = Check for courtesy message (ie: new firmware version). Amber = A matter of some interest has
occurred. Red = No modem inserted or critical system error. No Light = No user intervention is required.