Specifications

Care should be taken to ensure that the router antennas are not near metal or other RF reflective surfaces.
4. Connect the power source.
Plug the provided power supply (12V DC wall adapter) into an electrical outlet. Then connect the power supply to the router.
Ensure power is switched on:
O = OFF
I = ON
When you set the power switch to the ON ( I ) position, watch for the power LED to illuminate.
If you would like to secure the power supply cord, attach the Multipurpose Retaining Tool as shown below. Secure with included screws.
CradlePoint AER 2100 – Manual
07/03/2014
16