Specifications

Authentication type: Select the authentication and encryption type that will be used when connecting to the router from the following dropdown list. These settings
must match the configuration used on any SNMP clients.
MD5 with no encryption
SHA with no encryption
MD5 with DES encryption
SHA with DES encryption
MD5 with AES encryption
SHA with AES encryption
Username: Enter the Username configured on your SNMP host in the username field.
Password: Enter the Password for your SNMP host in the password and verify password fields. This password must be at least 8 characters long.
Enable SNMP traps: Enabling traps will allow you to configure a destination server, community, and port for trap notifications. Trap notifications are returned to the
server with SNMPv1.
Trap community string: The trap notifications will be returned to the trap server using this SNMPv1 trap community name.
Address for trap server: Enter the address of the host system that you want trap alerts sent to.
Trap server port #: Enter the port number that the remote host will be listening for trap alerts on. (Default: 162)
System Information
System information via SNMP is Read-Writable by default. However, if a value is set here, that field will become Read-Only.
System Contact: Input the email address of the system administrator.
System Name: Input the router’s hostname.
System Location: Input the physical location of the router. This is simply a string for your own information.
System Control
CradlePoint AER 2100 – Manual
07/03/2014
158