Specifications

The HeartBeat, when enabled, sends the following information to the specified URL at the specified time interval so the operator managing the hotspot knows if the router is
still functioning:
mac: The MAC address of the router, i.e. 00-11-22-33-44-55.
nasid: The NAS/Gateway ID of the router which should be entered in the UAM Settings.
os_date: A string showing the type of router and the firmware version running, e.g. Cradlepoint_4.1.2.
uptime: The uptime and system load average of the router
Allowed Hosts Prior to Authentication
Adding hostnames to this list will allow access from your network to any external domain or website prior to being authenticated. For example, a hotel might allow access to its
own website prior to authentication.
Click Add to enter new hostnames you wish to allow.
Enter the hostname or domain name of the website you wish to allow, e.g. www.company.com or company.com. To allow all domain and sub-domain options, use a
wildcard, e.g. *.company.com.
Click Submit to save your additions.
Authorized MAC Addresses
Add the MAC addresses of trusted machines. This gives them automatic access through the Hotspot portal.
Serial Redirector
A single USB Serial device can be used to establish a serial link to a host port on the router. The USB Serial device can also be accessed by running "serial" from an SSH
session.
Telnet to Serial Configuration
CradlePoint AER 2100 – Manual
07/03/2014
155