Specifications

Network Address – This is the network address that is the destination of the route. This should be set to the network address at the remote side of the tunnel.
Netmask – This is the corresponding subnet mask of the network being defined.
Network Mobility (NEMO)
NOTE: NEMO requires a feature license. Go to System Settings → Feature Licenses to enable this feature.
Network Mobility (NEMO) is an Internet standards track protocol defined in RFC 5177. The protocol allows session continuity for every node in a mobile network as the network
moves.
NEMO requires a service provider, e.g. Verizon Wireless Private Network with DMNR (Dynamic Mobile Network Routing). Your NEMO service provider will define many of the
settings for your NEMO configuration.
Once you have a NEMO service provider and a valid feature license, add networks to the Networks Routed by NEMO section by first clicking Add. In the popup window,
input:
Network Address
Netmask
The Network Address and Netmask, or subnet mask, together define a range of IP addresses that comprise the local network you want associated with the NEMO settings.
CradlePoint AER 2100 – Manual
07/03/2014
117