Specifications

Remote Name – Authorization name specified by and to the remote system as its identity, sometimes a username or hostname. Leave blank to match any.
Local Name – Authorization name specified by and to the remote system as the local system identity; sometimes a username or hostname. Leave blank to match
any.
Secret – Shared secret (or password) used to authenticate the associated Local and Remote names.
Overrides
Override Authentication methods/parameters. With methods set to Allow the two ends of the tunnel can negotiate a common scheme. Sometimes this negotiation fails, or the
implementation on one end is incompatible with the other. To solve those authentication issues, enable the overrides as needed.
Authentication – Username for user-specific authorization. Leave blank to disable.
CHAP – Choose from Allowed, Refused, or Required.
PAP – Choose from Allowed, Refused, or Required.
Name – Override names used to authenticate the router. Leave empty to use the default.
Add/Edit Tunnel – Routes
Typically specific routes are unnecessary, but they can be added in this section if needed. You can add or remove routes to be used to funnel packets through the tunnel.
CradlePoint AER 2100 – Manual
07/03/2014
116