Specifications

Tunnel Name – Enter a name to uniquely identify this tunnel.
LNS address – Enter the IP Address of the LNS (tunnel server) peer.
MTU – Set the maximum transmission unit (MTU) for the L2TP tunnel.
MRU – Set the maximum receive unit (MRU) to request from the tunnel peer. The MRU is very similar to the MTU: MTU is for packets sent and MRU is for packets
received.
Tunnel Enabled – Click to enable/disable this tunnel. Default: Enabled.
Authentication
More authentication options and overrides are available in the next section.
Username – Username for user-specific authorization. Leave blank to disable.
Password – Shared secret (or password) used to authenticate the associated Local and Remote names.
Redial
Enabled – When this is selected, the tunnel will attempt to reconnect if disconnected.
Add/Edit Tunnel – Authentication
CradlePoint AER 2100 – Manual
07/03/2014
115