Specifications

3.4 Document Insertion
Insertion procedures may be customized to satisfy varied applications and user
preferences. (See Printer Parameters in 3.5.1).
If auto alignment is enabled, gently insert the document upper left corner toward
the point where the left edge guide and the feed rollers meet. Release the
document when the rollers grip it and it will be automatically aligned and inserted
to the first print line.
Auto alignment may be disabled for an individual document by pressing the
FUNCT key before insertion or for all documents by changing the SKEW
CORRECT printer parameter. When auto alignment is disabled, the left document
edge should be aligned to the left edge guide and then slid forward into the feed
rollers which will insert it to the first print line.
The PAUSE printer parameter may be set to delay when the rollers activate for a
few seconds or until the A key is pressed. This allows more time to insert
cumbersome documents or to train new users. With auto alignment enabled the
printer should be configured for no delay.
The DOCUMENT INSERT printer parameter may be set to move the document to
the last (bottommost) rather than the first printable line.
The BEGIN PRINTING printer parameter may be set to delay printing until ENTER
is pressed. This allows the operator to insure that the document has inserted
correctly. If not, it may be EJECTed and reinserted.
3.5 Configuration
The printer may be configured from the keypad with all parameters saved in a
non-volatile memory. There are 4 configuration categories:
Configuration Category Press
Printer Parameters 9 2 then FUNCT
Communication Parameters 9 3 then FUNCT
Override Parameters 9 9 then FUNCT
Service Parameters 9 4 then FUNCT
After accessing a category, each parameter will be displayed. Press A to display
the next choice for the parameter or press ENTER to display the next parameter. If
the display does not change when A is pressed, the keypad is locked. See 3.5.3
to unlock the keypad.
Document edge
guide
5