Specifications

Bankway Network Standards Guide - Distributed Terminal Server in Every Branch

This constitutes a trade secret of Fidelity National Information Services, Inc. 03/08 Research & Development

Page 14 of 63

The Bankway Terminal Server – located at each branch – is responsible for delivering the

Bankway interface to the users via terminal emulation software. All client software processing

occurs on the terminal server and is transmitted to the workstations via a network connection.

The following configurations are based upon the total number of concurrently active workstations

in the server farm.

The following information summarizes the Recommended Hardware Configuration for the

installation of Bankway.

● Pentium 4 – 2.0 GHz processor or higher

● GB RAM

● Internal Tape Backup (Optional)

● SCSI hard drive controller using RAID 5 (disk striping)

● 5 GB free (usable) hard drive space

● 100 Mbps Ethernet Card

● CD-ROM Drive

● 1.44 MB Floppy Drive

● Monitor

● Keyboard

● Mouse