Specifications

Bankway Network Standards Guide - Client Server Environment
This constitutes a trade secret of Fidelity National Information Services, Inc. 03/08 Research & Development
Page 14 of 59
The Bankway Image Server is used to store your customer images. These images can be
signature cards, photo identifications, or any other image that requires storage.
The Image Server will typically be located at the main office or data center.
Note: The Image Server should be dedicated to the processing and storage of Bankway
images for the entire Bank.
The following information summarizes the Recommended Hardware Configuration for the
installation of Bankway imaging capabilities.
● Pentium 4 –2.0 GHz Processor or higher
● 512 MB Random Access Memory (RAM)
● SCSI hard drive controller using RAID 5 (disk striping)
● 20 GB free (usable) hard drive space
● 1.44 MB Floppy drive
● CD-ROM Drive
● SVGA Monitor (minimum resolution of 800 x 600 pixels) with 256 color resolution
● 100 Mbps Ethernet Card
● Internal Tape Backup (Required)
● Uninterruptible Power Supply (UPS) with surge protection
● Keyboard
● Mouse