Specifications

Bankway Network Standards Guide - Client Server Environment
This constitutes a trade secret of Fidelity National Information Services, Inc. 03/08 Research & Development
Page 10 of 59
The branch server – located at each branch – is a key component of the overall network
configuration. This server continuously runs the Bankway Data Server service which
synchronizes the latest software releases, bank standards and databases with the Bankway
Express Server and the Bankway Host.
The following information summarizes the Recommended Hardware Configuration for the
installation of Bankway:
Note: The Bankway Branch Server should be dedicated to the use and processing of
Bankway only.
● Pentium® 4 – 2.0 GHz Processor or higher
● 512 MB Random Access Memory (RAM)
● SCSI hard drive controller using RAID 5 (disk striping)
● 20 GB free (usable) hard drive space
● 1.44 MB Floppy drive
● CD-ROM Drive
● SVGA Monitor (minimum resolution of 800 x 600 pixels) with 256 color resolution
● 100 Mbps Ethernet Card
● Internal Tape Backup (Optional)
● Uninterruptible Power Supply (UPS) with surge protection
● Keyboard
● Mouse
The following information summarizes the minimum software requirements for the installation of
Bankway.
● Microsoft Windows Server 2003
● Bankway Service Level CD
Note: If not using the Bankway SQL Server configuration, MSDE must be
installed on all branch servers. Ideally, the SQL Express upgrade for MSDE
should be utilized. The MSDE installer is included on the Bankway CD in the
Special Installation folder.